697454
81
Zoom out
Zoom in
Previous page
1/170
Next page
AMAX panel Settings | en 81
Bosch Security Systems B.V. Installation Manual 2019.08 | 11 | F.01U.309.277
Notice!
Please note that this function can only be accessed and programmed via the remote
programming software A-Link Plus.
How to program a schedule
1. Select the function you want to schedule. The following function can be selected:
Arm (up to 16 areas)
Disarm (up to 16 areas)
Switch on output (up to 20 outputs)
Switch off output (up to 20 outputs)
Activate user (up to 250 users)
Deactivate user (up to 250 users)
2. Enter the desired start time (hh:mm) and the date (dd/mm) for the schedule.
3. Choose the selected days for the schedule (yes/no for each weekday).
4. Optionally select a exception (e.g. for holidays)
P The schedule is programmed and can be enabled/disabled by the user.
6.5.2 System view
Fault analysis
This option display faults, tampers and the bypass/isolate status. The AMAX panel can display
eight categories of 41 types of system faults and tampers.
How to display faults and tampers via a text keypad
In a text keypad the faults and tampers are displayed directly.
How to display faults and tampers via a master keypad
In a master keypad the system faults and tampers are displayed directly. After an area is
selected, the area-specific faults and tampers are displayed.
How to display the bypass status
1. Enter your code + [3] [3] and press [#].
The system beeps twice and the bypassed zones are displayed.
2. Use [] and [] to display all bypassed zones.
3. Press [#] to exit.
How to display the isolate status
1. Enter your code + [3] [6] and press [#].
The system beeps twice and the isolated zones are displayed.
2. Use [] and [] to display all isolated zones.
3. Press [#] to exit.
How to display faults and tampers via a LED/LCD keypad
1. Enter your code + [2] [1] and press [#].
The system beeps twice. The FAULT indicator is extinguished and the STAY and AWAY
indicators flash. One of the number indicators is lit. Example: 2.
2. Enter the number that is lit in the system. Example: 2.
One of the number indicators is lit. Example: 1.
3. Repeat step 2 until there is no number lit anymore.
4. Refer to the table Types of fault or tamper conditions for a description of the fault or
temper. The consecutively lit number indicators correspond to fault or tamper types.
Example: 2 – 1, which indicates a panel AC failure.
5. If necessary press [0] to return to step 2.
6. Press [#] to exit.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info