697454
82
Zoom out
Zoom in
Previous page
1/170
Next page
82 en | Settings AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
P The STAY and AWAY indicators are extinguished and the FAULT indicator is lit.
For an overview of the possible faults and tampers and how to solve them, see Trouble fault
inquiry, page 151.
Firmware version
This option displays the current firmware version.
6.5.3 System factory default
The system can be reset to the factory default settings either via software or via hardware.
Recorded voice messages are not automatically deleted when the system is reset to the
factory default setting. Voice messages have to be deleted separately. Therefore, refer to Voice
default, page 80.
How to reset the system to the factory default settings via software
Factory default
This option resets the system to the factory settings.
4 Select DEFAULT PANEL YES if you really want to reset the system or select DEFAULT
PANEL NO if you don’t want to reset the system.
P All programming parameters are reset to factory default.
PAD default option
This option enables/disables the possibility to reset the system via hardware. If this option is
disabled, the system can not be reset via hardware any more.
How to reset the system to the factory default settings via hardware
The system can be reset to factory default settings with the ‘resetting to factory default’ pads
at the top on the printed circuit board on the main board of the AMAX panel if this possibility
is enabled in the software.
1. Disconnect the AC power supply and the backup battery.
2. Short-circuit the “resetting to factory default” pads.
3. Power up the system.
Quick flash of the red LED indicator on the printed circuit board of the AMAX panel
indicates that the factory default is reset.
P All programming parameters are reset to factory default immediately after releasing the
short-circuited bonding pads.
Notice!
If the default pads are short-circuited for over 10 seconds after power-up, the AMAX panel
discards resetting to factory default.
6.6 Outputs and sirens
6.6.1 Outputs
Onboard / extension output
The AMAX panel is equipped with on-board outputs and supports DX3010 output extension
modules with each extension module supporting 8 relay outputs.
When on-board output 1 or 2 fails due to a short circuit or an open circuit, as long as there is a
backup power supply, the output fault will not affect the normal operation of the whole
system, but will be detected by the system, if monitoring of siren 1 is enabled. Refer to Siren
supervision, page 78.
Each output is programmable and can be set to follow multiple events.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info