697454
70
Zoom out
Zoom in
Previous page
1/170
Next page
70 en | Settings AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
Zone lockout
The zone lockout defines after how many times of triggering an alarm during one arming cycle,
the zone in which the alarm occurred will be “locked”. If a zone is locked, the alarms its
alarms will be ignored by the system. This option defines whether the zone lockout mode is
allowed for a zone and after how many times of triggering an alarm the zone will be locked.
The following selections are possible:
Disabled
Locked after triggering the alarm 1 time
Locked after triggering the alarm 3 times
Locked after triggering the alarm 6 times
Alarm duration
The zone lockout will be reset after disarming.
1 time
The AMAX panel will process locking according to the following logic:
1. When an alarm is triggered within the period of alarm output time, the AMAX panel will
ignore the status detection of the zone.
2. After the alarm has been triggered 1 time, the zone will be locked.
3. If the alarm occurs in the locked zone, the zone will send zone fault report.
4. Before the end of the alarm output time, ten zone recovery events will not be transmitted.
5. If the zone locking option is disabled, the times of alarms will not be restrained. Even
when other zones are locked, that zone can still generate the alarm.
3 times
Similar to 1 time of alarm locking, with alarm limited to not more than 3 times.
6 times
Similar to 3 times of alarm locking, with alarm limited to not more than 6 times.
Alarm duration
Locking occurs within the period of alarm output time. Repeating the process of alarm locking
in the period of alarm output time, without limit to times.
Zone EOL
The system supports tamper detection of the zone. This function ensures that the zone is in
normal operating status and triggers an alarm if not. The following selections are possible:
0 = EOL 2,2k
1 = DEOL 2,2k / 2,2k
2 = reserved
3 = NC
4 = NO
EOL 2,2k (end of line)
An EOL resistor with 2,2k is required for the zone. A zone alarm is triggered if another value
than 2,2k is registered.
DEOL 2,2k / 2,2k (double end of line)
A DEOL resistor with twice 2,2k is required for the zone. A zone alarm is triggered if 4,4k are
registered. A tamper alarm is triggered if any other value is registered.
NC (normally closed)
A NC resistor is required for the zone. A zone alarm is triggered if the resistor is opened.
NO (normally open)
A NO resistor is required for the zone. A zone alarm is triggered if the resistor is closed.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info