697454
69
Zoom out
Zoom in
Previous page
1/170
Next page
AMAX panel Settings | en 69
Bosch Security Systems B.V. Installation Manual 2019.08 | 11 | F.01U.309.277
When the keypad or key switch zone is used to execute system arming, the system will
show the zone status at first. If a zone in triggering status is not bypassed and the forced
arming option is in disabled status, it cannot be successfully armed.
When the keypad or key switch zone is used to execute system arming, the system shows
the zone status at first. If a zone in triggering status is not bypassed and the forced
arming option is in enabled status, the system is successfully armed. If the zone is still
not recovered at the end of the exit delay time, the system shows the fault report of the
zone.
When the fault is recovered, a zone recovery report is sent.
The exceptions to forced arming option:
In telephone and programming software remote arming, forced arming is available even if
the zone is programmed as enabled or disabled forced arming.
Bypassing
If bypassing is allowed, the operator can bypass zones before arming the system. If bypassing
is not allowed, manual bypass of the zone is not available. After manual bypass of the zone, a
zone bypass report is sent.
The zone bypass is valid in only one arming period and will be resumed after disarming. Before
disarming, the bypassed zones ignore all zone triggering and restoration events.
The key switch zone cannot be bypassed.
Silent alarm / chime mode
This option defines whether silent alarm and chime mode are allowed for a zone. The
following options are possible:
Disable silent alarm and chime mode
Allow silent alarm
Allow chime mode
Allow both silent alarm and chime mode
Silent alarm
Allowing the silent alarm option sets the zone to mute alarm. The silent alarm option is only
effective for output event type 03 "system alarm".
To disable the keypad buzzer, refer to Zone alarm on keypad, page 71.
Chime mode
If chime mode is allowed, the process is as follows:
If the chime mode is used and a zone is triggered the keypad buzzer will sound for 1 second
(only in disarmed status).
Zone pulse count
This option defines whether the zone pulse count mode is allowed for a zone.
The process is as follows:
Pulse count duration time must be configured
Pulse count for a zone can be set to a value between 1 and 9 (0 = disabled)
The process is as follows:
An alarm is created only if the zone is triggered as many times as the value “pulse count”
within the time “count duration”
4 For more information, refer to Pulse count duration programming, page 135.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info