697457
148
Zoom out
Zoom in
Previous page
1/158
Next page
When the disassembly of DX2010 module 1, 2, 3, 4, 5, or 6 is detected, zone expansion
module 1, 2 tamper report will be sent. When the module resumes to normal operation, the
fault recovery report will be generated.
Fault conditions:
When the disassembly of DX2010 module 1, 2, 3, 4, 5, or 6 is detected, the AMAX panel will
consider the occurrence of zone extension module 1, 2, 3, 4, 5 or 6 tamper.
Recovery conditions:
When the module tamper recovers, tamper 1, 2, 3, 4, 5, or 6 will be recovered. Fault
monitoring:
When the DX2010 module 1, 2, 3, 4, 5, or 6 tamper is detected, the report will be sent to the
relevant path according to programming address 0124.
The fault indicator on the keypad flashes slowly.
When module 1, 2, 3, 4, 5, or 6 tamper is recovered, the report will be sent to the specified
path.
If currently there are not other faults, the fault indicator of the keypad will go off.
Zone Tamper DEOL
Condition:
Tamper contact is triggered (zone is programmed as dual end of line)
Restore:
Tamper contact is restored and tamper condition is reset.
Supervise:
1. Report the sensor tamper to configured destination on Address 124 when the Sensor
tamper is detected.
2. Slow flash FAULT indicator (refer the detailed description in chapter keypad indicators).
3. When the tamper condition is reset, send the restored report to the configured
destinations. The FAULT indicator is turned off when there is no other system fault.
Zone type Tamper
Condition:
Tamper contact (direct connected to the zone) is triggered (zone type = tamper)
Restore:
Tamper contact is restored and tamper condition is reset.
Supervise:
1. Report the tamper condition to configured destination on Address 124 when the tamper
condition is detected.
2. Slow flash FAULT indicator (refer the detailed description in chapter keypad indicators).
3. When the tamper condition is reset, send the restored report to the configured
destinations. The FAULT indicator is turned off when there is no other system fault.
Keypad Lock out
Condition:
Invalid code is entered more number of times than allowed by the code retry attempts
(programmed in address 0499)
Restore:
Keypad lock out is reset when the keypad lockout time (3min) is expired and the fault is reset.
Supervise:
1. Report the keypad lock out to configured destination on address 124 when the keypad
lock out is detected.
2. Slow flash FAULT indicator (refer the detailed description in chapter keypad indicators).
148
en | Troubleshooting AMAX 2100 / 3000 / 4000
2013.10 | 01 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH
148


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX 4000 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX 4000

Bosch AMAX 4000 User Manual - English - 24 pages

Bosch AMAX 4000 User Manual - English - 36 pages

Bosch AMAX 4000 Quick start guide - English - 38 pages

Bosch AMAX 4000 Installation Guide - German - 170 pages

Bosch AMAX 4000 Quick start guide - German - 34 pages

Bosch AMAX 4000 Installation Guide - Dutch - 166 pages

Bosch AMAX 4000 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info