1151
22
Zoom out
Zoom in
Previous page
1/135
Next page
English - 7
22 • F016 L70 362 • TMS • 24.01.06
Felling Back Cut: Make the felling back cut (Y) at
least 50 mm higher than the horizontal notching cut.
Keep the felling back cut parallel to the horizontal
notching cut. Make the felling back cut so enough
wood is left to act as a hinge. The hinge wood keeps
the tree from twisting and falling in the wrong direc-
tion. Do not cut through the hinge.
As the felling gets close to the hinge the tree should
begin to fall. If there is any chance that the tree may
not fall in desired direction or it may rock back and
bind the saw chain, stop cutting before the felling
back cut is complete and use wedges of wood, plas-
tic or aluminium to open the cut and drop the tree
along the desired line of fall.
When the tree begins to fall remove the chain saw
from the cut, stop the motor, put the chain saw
down, then use the retreat path planned. Be alert for
overhead limbs falling and watch your footing.
To complete the felling operation, drive a wedge (Z)
into the horizontal cut.
Beware of falling branches when the tree starts to
move.
Before any work on the machine itself, pull
the mains plug from the socket.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose,
dislodged or damaged chain and chain bar, loose
fixings and worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using the chain saw.
If the chain saw should happen to fail despite the
care taken in manufacturing and testing, repair
should be carried out by an authorized customer
service agent.
Before returning, ensure all oil in the oil tank has
been emptied.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number (TYP) from
the nameplate of the machine!
Fit the chain and chain bar as described in “Assem-
bly and Tensioning Chain”.
The circular groove of the chain bar will wear partic-
ularly on the lower edge with time. When replacing
the chain turn the chain bar 180° to allow even wear,
thus extending chain bar life.
Check drive sprocket 21. If it is worn out or damaged
due to strain, have it exchanged by an authorized
Bosch service agent.
Have your chain sharpened professionally at your
Bosch approved service agent or sharpen the chain
yourself using the Bosch sharpening kit or a Dremel
power tool with the appropriate grinder (1453), both
available at your Bosch approved service agent. Fol-
low the sharpening instructions supplied with the
sharpening kit.
Proper functioning of the automatic oiler can be
checked by running the chain saw and pointing the
tip of the chain bar towards a piece of cardboard or
paper on the ground. Caution: Do not touch the
ground with the chain. Ensure safety clearance of
20 cm. If an increasing oil pattern developes, the au-
tomatic oiler is operating fine. If there is no oil pat-
tern, despite a full oil reservoir, see “Fault Finding” or
contact your Bosch approved service agent.
Chain and Chain bar
AKE 30.............................................. F 016 800 259
AKE 35.............................................. F 016 800 260
AKE 40.............................................. F 016 800 261
Chain
AKE 30.............................................. F 016 800 256
AKE 35.............................................. F 016 800 257
AKE 40.............................................. F 016 800 258
Cleaning
Chain sharpening/cleaning kit .......... F 016 800 262
Chain oil 1 litre .................................. 2 607 000 181
Chain oil 5 litre .................................. F 016 800 111
Additional accessories
Gloves............................................... 2 607 000 134
Protective goggles ............................ F 016 800 178
SNR 19 ear protectors
(sounding proofing level 19 dB (A)).....2 607 990 042
SNR 24 ear protectors
(sounding proofing level 24 dB (A)).....2 607 990 043
Maintenance
Replacing/Changing Chain and
Chain Bar
Sharpening Chain
Checking the Automatic Oiler
Accessories
F016 L70 362 - GB Seite 7 Mittwoch, 25. Januar 2006 8:47 08
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AKE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 35 in the language / languages: Dutch as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AKE 35

Bosch AKE 35 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info