Manual Boretti BIK-78 (page 68 of 74) (English, German, Dutch, French)

647500

Zoom out

Zoom in

1/74

Switch-off the appliance before cleaning.

Do not clean the hob if the glass is too hot due

to risk of burn.

• Remove light marks with a damp cloth with

washing up liquid diluted in a little water. Then

rinse with cold water and dry the surface

thoroughly.

• Highly corrosive or abrasive detergents and

cleaning equipment likely to cause scratches

must absolutely be avoided at all times.

• Do not ever use any steam-driven or pres-

sured appliance.

• Do not use any object that may scratch the

ceramic glass.

• Ensure that the pan is dry and clean. Ensure

that there are no grains of dust on your ce-

ramic hob or on the pan. Sliding rough pans

across the glass will scratch the surface.

• Spillages of sugar, jam, jelly, etc. must be

removed immediately to prevent the surface

being damaged.

Maintenance and cleaning

What to do in case of a problem

When the symbol [ E 4 ] appears :

• The table must be recongured. Please implement the following steps :

I) Important : before you start, make sure there is nothing on the hob

II) Disconnect the appliance from the power supply by removing the plug, fuse or turning the

circuit breaker off

III) Reconnect the table to the grid

IV) Procedure : take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm

* start the procedure within 2 minutes after reconnecting the hob to the grid

* don’t use the [ O/I ] touch

1 2 3

Slider

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BIK-78 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BIK-78 Manual

Product: