Manual Boretti BIK-78 (page 72 of 74) (English, German, Dutch, French)

647500

Zoom out

Zoom in

1/74

Connection of the hob

Setting up the conﬁgurations:

For the various kinds of connection, use the

brass bridges which are in the box next to the

terminal

Monophase 230V~1P+N

(not for the Netherlands!)

Put the 1st bridge between terminal 1 and 2,

the 2nd between 3 and 4.

Attach the earth to the terminate “earth”, the

neutral N to terminal 3 (or 4), the Phase L to

one of the terminals 1 or 2.

Biphase 400V~2P+N

Put a bridge between terminal 3 and 4.

Attach the earth to the terminate “earth”, the

neutral N to terminal 3 (or 4), the Phase L1

to the terminals 1 and the Phase L2 to the

terminal 2.

Biphase 230V~2P+2N

Attach L1 to terminal 1, L2 to terminal 2, N1

to terminal 3, N2 to terminal 4 and earth to

terminal “earth”

Caution! Ensure that you correctly attach the

wires and the bridges. Tighten the screws

properly. Before making the connection, we

strongly advise you to locate the phase(s), neu-

tral and earth on the mains. Note: the bridges

between terminals 4-5 and between terminals

1-2 were installed during the factory check.

Boretti cannot be held responsible for any incident resulting from incorrect connection

or which could arise from the use of an appliance which has not been earthed

or has been equipped with a faulty earth connection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BIK-78 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BIK-78 Manual

Product: