Manual Boretti BIK-78 (page 69 of 74) (English, German, Dutch, French)

647500

Zoom out

Zoom in

1/74

V) First step : cancel the existing conﬁguration

1) Press the touch n°2 and hold down

2) The symbol [ - ] will appear on each display

3) With your other hand, press successively and quickly (less than 2s) on each [ - ] display.

Begin from the front right side and turn contrary clockwise, as described on the picture

(from a to d). (A double “beep” means an error occured. If so, start again from item 1).

4) Remove your ngers from the touch control, then push again on touch 1 for a few seconds,

until blinking [ E ] symbols appear.

5) Wait until [ E ] symbols stop blinking.

6) After a few seconds, [ E ] are automatically transformed in [ C ]. The existing setup has been

cancelled.

VI) Second step : new setup

1) Take a ferromagnetic pot with a minimum diameter of 16 cm

2) Select a cooking zone by pushing on the corresponding [ C ] display

3) Place the pot on the area to be set

4) Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now congured.

5) Follow the same procedure for each cooking zone with a [ C ] display.

6) All the cooking zones are congured once all the displays are turned off.

Please use the same pot for the whole procedure.

Never put several pots together on the zones during the setup-process.

• If [ E 4 ] displaying remains, please call the customer care

The hob or the cooking zone doesn’t start-up :

• The hob could badly connected on the elec-

trical network. Check the connection.

• The protection fuse might have cut-off the

power. Check the fuse.

• The lock for the control might be activated.

Unlock the control.

• The touch control might be covered with

grease or water. Clean the touch control.

• An object is put on a key. Remove the ob-

ject.

The control panel displays [ U ] :

• There is no pan on the cooking zone.

• The pan is not compatible with induction.

• The bottom diameter of the pan is too

small.

The control panel displays [ C ] or [ E ] :

• Call the After-sales Service.

One or all cooking zone cut-off :

• The safety system functioned.

• You forgot to cut-off the cooking zone for a

long time.

• One or more sensitive keys are covered.

• The pan is empty and its bottom overhea-

ted.

• The hob also has an automatic reduction of

power level and breaking Automatic overhe-

ating

Continuous ventilation after cutting off the hob :

• This is not a failure, the fan continuous to

protect the electronic device.

• The fan cooling stops automatically.

The automatic cooking system doesn’t start-up :

• The cooking zone is still hot [ H ].

• The highest power level is set [ 9 ].

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BIK-78 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BIK-78 Manual

Product: