CAUTION: The cylinder contains high pressure CO² gas, pressurised to approximately 230 bar.
Handle the cylinder with the utmost care and always close tap “O” (fi g. 1) even when the cylinder is empty. Taps “O” and “S” (fi g. 1) should be kept closed,
even when the machine is not used.
Do not open the cylinder tap (valve) until all items, including the dispense head “I” (fi g. 1) have been connected.
To connect the CO² cylinder, proceed as follows:
• Close tap “S” (fi g. 3).
• Remove the seal from the cylinder.
• Fit the CO² outlet nozzle of the cylinder to the attachment with the reducer manual clamp.
• Tighten carefully, screwing down the manual clamp device until it is fi rmly secured.
• Tighten the cylinder straps “L” (fi g. 3).
• Open tap “O” (valve) (fi g. 3).
• Open tap “S” (fi g. 3).
To remove the empty cylinder, proceed as follow:
• Close tap “O” (valve) (fi g. 3).
• Close tap “S” (fi g. 3).
• Release the cylinder straps “L” (fi g. 3).
• Loosen the manual clamp device until the cylinder is completely released.
7. REGULATING CO², TEMPERATURE AND SERVING BEER
Important: Beer is not a drink for children. Children should only have access to the dispenser under the stric supervision of their parents or responsible
adults.
If children are at home alone, close taps “O” and “S“ (fi g. 1) and remove the dispense head “I” (fi g. 1) from the keg.
Beer will keep for approximately 8 days after a new keg has been opened. However this can differ per brand and type of beer. Check for accurate durability after
opening the keg with your keg supplier.
Beer quickly deteriorates, posing a hazard (bacteria develop), so the dispenser should be washed and disinfected regularly. This should preferably be done every
time the keg is changed or at least every 15 days.
A dispenser with stale beer residues can smell unpleasant and give the beer an unpleasant taste. The beer in a new keg, connected to a dirty dispenser, is quickly
contaminated if bacteria are present, and even if a new keg is connected, the beer acquires an unpleasant taste. Carefully follow the instructions for “washing and
disinfecting the dispenser” .
Boretti BV shall not be held liable in any way for damage caused to people or objects as a result of failure to comply with the above.
REGULATING CO² PRESSURE
Caution: Do not disassemble or tamper with the pressure reducer.
The high pressure of CO² is lowered to a set value using the adjusting screw “R” (fi g. 1) on the pressure reducer.
The pressure value is confi gured based on the temperature that the keg and type of beer (Pils or Lager) is exposed to.
The wrong pressure regulation will make the beer too frothy or under carbonated (dull beer or with little froth).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Boretti Beermachine at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Boretti Beermachine in the language / languages: English, Dutch, French, Spanish as an attachment in your email.
The manual is 16,22 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
