6.CONNECTING AND REPLACING THE CO² CYLINDER - Page 14
7.REGULATING CO², TEMPERATURE AND SERVING BEER - Page 14
8.MAINTENANCE AND CLEANING - Page 14
9.REPLACING THE KEG - Page 19
1. SUPPLIED ITEMS
• CLEANING TABS 1 PACK OF 10 TABS
• 4.5 x 35 SCREWS NR. 04
• 4.5 x 18 SCREWS NR. 02
• WASHERS NR. 04
• INSTRUCTIONS BOOKLET NR. 01
• SPATULA NR. 01
• WASHING ATTACHMENT FOR KORB (S-SYSTEM) NR. 01
• WASHING ATTACHMENT FOR FLACH (A-SYSTEM) NR. 01
• DISPENSE HEAD FOR KORB (S-SYSTEM) NR. 01
• DISPENSE HEAD FOR FLACH (A-SYSTEM) NR. 01
2. TECHNICAL SPECIFICATIONS
Operating voltage : 230 V-AC 50 Hz
Absorbed power : 190 Watt
Draught capacity : +/- 40 l/H (depends on the set pressure)
Cooling capacity: 465W/ 400 kcal/h
Sizes:
External: W 595 x H 458 x D 19
Internal: W 560 x H 450 x D 400
3. SAFETY AND INSTRUCTIONS
This dispenser conforms to current safety regulations. Improper use of the dispenser may cause damage to people and/or objects. Carefully read the instructions
for use before operating the dispenser.
The instructions include important information on safety, use and maintenance to protect you and the machine. The dispenser has been exclusively designed for
serving beer. Any other use is not permitted and may be hazardous.
Boretti BV shall not be held liable in any way for damage caused to people or objects as a result of improper and/or incorrect use of the dispenser.
TECHNICAL SAFETY
Before connecting the dispenser to the mains, make sure the voltage and frequency on the rating plate are compatible with the electrical system.
The safety of the dispenser is only guaranteed if it is connected to a standard earthing conductor.
Boretti BV shall not be held liable in any way for damage caused to people or objects as a result of faulty operation of the earthing conductor (for example
the risk of electric shock).
Do not use extension leads to connect the dispenser. Extension leads do not guarantee safety conditions required for the dispenser (for example the risk of
overheating).
If the mains lead connecting the dispenser is damaged, it must be replaced by qualifi ed personnel, to prevent any risks.
To prevent considerable harm to the user, installation, maintenance and repairs must be undertaken exclusively by qualifi ed personnel.
To disconnect the dispenser from the mains, remove the plug from the socket without pulling the lead.
Do not open the dispenser cover, under any circumstances. Do not touch live electrical parts or leads and do not change the electrical structure of the dispenser,
as this may result in electric shock.
The cylinder contains high pressure CO² gas, pressurised to approximately 230 bar. Handle the cylinder with the utmost care and always close tap “O” (fi g.
1) even when the cylinder is empty. This tap should be kept closed, even when the machine is not used.
Boretti BV shall not be held liable in any way for damage caused to people or objects as a result of failure to comply with the above.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Boretti Beermachine at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Boretti Beermachine in the language / languages: English, Dutch, French, Spanish as an attachment in your email.
The manual is 16,22 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
