714522
30
Zoom out
Zoom in
Previous page
1/44
Next page
EN
30
Operation
www.bora.com
7 Operation
Observe all safety and warning information during
operation (see Safety chapter).
INFO The integrated cooktop extractor must not be
used with other cooktops.
INFO The cooktop should only be operated when the
stainless steel grease filter and air inlet nozzle
are installed.
7.1 Switching cooktop on/off
Switching on
Press to switch on the cooktop.
The power level
0
is displayed in the cooking zone
indicators.
Switching off
INFO Use the operating panel to switch off the
cooking zone after use. Do not rely on the pan
size recognition.
Press to switch off the cooktop.
Pay attention to the residual heat display
(see Device Description chapter).
7.1.1 Switching on the cooking zone
Press the cooking zone button (e.g. ) of the desired
cooking zone.
The
0
in the cooking zone indicator lights up more
brightly. The cooking zone indicator light lights up.
7.1.2 Adjusting the power level
Press to set power level
5
or
press to set power level
9
.
7.1.3 Changing the power level
Press the cooking zone button (e.g. ) of the desired
cooking zone.
The cooking zone indicator lights up more brightly.
Press or until the required power level is shown
in the cooking zone indicator.
7.1.4 Switching on the power setting
INFO Only the two front cooking zones are equipped
with a power-enhancing power setting.
Press the cooking zone button (e.g. ) of the desired
cooking zone.
Continue pressing until power level
P
is displayed in
the cooking zone indicator.
After 5 minutes, the cooking zone is automatically
switched to power level
9
.
If one cooking zone is operated with the
P
power set-
ting, then the operation of the second cooking zone on
this side is possible at a maximum of power level
5
.
If power level
5
is increased, the
P
power setting is
switched off.
7.1.5 Switching the power setting off early
Press the cooking zone button (e.g. ) of the desired
cooking zone. The indicator will appear brighter.
Continue pressing until the lower power level that
you want is displayed.
7.1.6 Switching off the cooking zone
Press the cooking zone button (e.g. ) of the desired
cooking zone.
Continue pressing or until the cooking zone
indicator displays power level
0
.
The display will show a
0
for a few seconds.
7.1.7 Pay attention to the residual heat
display
After switching it off, the cooking zone remains hot.
H
is displayed in the cooking zone indicator (residual heat
indicator). The cooking zone indicator will go out after
sufficient time is left to cool down (temperature < 60 °C).
INFO While a
H
is displayed in the cooking zone
indicator (residual heat display), do not touch
the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
Pay attention to the residual heat indicator.
Make sure the hot hobs are not touched and no
objects are placed on it.
7.1.8 Using the timer function
Prerequisite
The cooktop must be switched on.
You can use 2 timer functions:
Short time (egg timer)
(the cooking zone is not automatically switched off)
Automatic cut-off (for automatic cutting off of a
cooking zone)
You can set a time range of between 1 and 99 minutes for
both timer functions.
INFO After the pre-set time has passed in the timer
display,
00
will be shown for a few seconds.
A signal tone will sound for a few seconds.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BIU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BIU in the language / languages: English as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BIU

Bora BIU User Manual - German - 44 pages

Bora BIU User Manual - Dutch - 44 pages

Bora BIU User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info