714522
28
Zoom out
Zoom in
Previous page
1/44
Next page
EN
28
Assembly
www.bora.com
Connect the exhaust air duct [7] installed on-site to the
exhaust air arc [6].
Seal the duct connection so that it is airtight using
adhesive sealing tape UDB1.
Fasten the cooktop using the mounting brackets [8] at
the worktop.
Afterwards, insert the stainless steel grease filter [4]
and air inlet nozzle [3].
Seal the surrounding gap with a black heat-resistant
silicone sealing compound.
6.8 Establishing the power
connection
Observe all safety and warning information (see Safety
chapter).
Observe all national and regional laws and regulations
as well as the supplementary regulations of the local
utility companies.
INFO The power connection must only be
implemented by a certified engineer. He/she
also assumes responsibility for the proper
installation and commissioning.
INFO Connection via plug-in contacts, e.g. plugs with
earthing contacts, are not allowed.
INFO The device complies with IEC 61000-3-12
Switch off the main switch/automatic circuit breaker
before connecting the cooktop.
Protect the main switch/automatic circuit breaker
from being switched on without permission.
Make sure the device is not energised.
Only connect the cooktop using a permanent
connection to a type H 05 VV-F power supply line
with appropriate minimum cross section (s. Tab. Fuse
protection and minimum cross section).
Connection Fuse protection Minimum
cross-section
Three-phase-connection 3 x 16 A 2.5 mm
2
Two-phase-connection 2 x 16 A 2.5 mm
2
One-phase-connection 1 x 32 A 4 mm
2
Tab. 6.2 Fuse protection and minimum cross section
For surface installation
Make sure that the sealing tape is resting on the
worktop.
For flush installation
Make sure that the sealing tape of the cooktop is
sealed well all the way round.
1
2
Fig. 6.34 Height adjustment plates
[1] Cooktop
[2] Height adjustment plates
If necessary insert height adjustment plates [2].
54321
8
5
7
6
1
Fig. 6.35 Connecting the exhaust air duct + secure
[1] Cooktop
[2] Suction opening
[3] Air inlet nozzle
[4] Stainless steel grease filter
[5] Worktop cut-out
[6] Exhaust air arc
[7] Exhaust air duct
[8] Mounting bracket
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BIU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BIU in the language / languages: English as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BIU

Bora BIU User Manual - German - 44 pages

Bora BIU User Manual - Dutch - 44 pages

Bora BIU User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info