714522
31
Zoom out
Zoom in
Previous page
1/44
Next page
EN
31
Operation
www.bora.com
Switching the timer off early
Press the cooking zone button of the cooking zone for
which you wish to switch off the timer.
Press and simultaneously.
In the timer display, the set time is displayed and the
cooking zone indicator light flashes.
Press until the timer display shows
00
.
7.1.9 Activating/deactivating the child
safety lock
INFO If a cooking zone indicator alternately shows
L
and
H
, this means the cooking zone is still hot.
Activating the child safety lock
Prerequisites:
The cooktop is switched on.
All cooking zones are switched off.
Within 10 seconds of switching it on, press sensor
buttons and simultaneously before pressing
sensor button one more time.
L
is displayed in all cooking zone indicators. The child
safety lock is activated.
Deactivating the child safety lock for a
cooking session
INFO If a cooking zone indicator alternately shows
0
and
H
, this means the cooking zone is still hot.
Press sensor buttons and simultaneously. The
power level
0
is displayed in all cooking zone indicators
and the cooking zone indicator lights flash.
The power level you require can now be set for each
cooking zone.
After the cooktop has been switched off, the child safety
lock is activated again.
Deactivating the child safety lock
INFO If a cooking zone indicator alternately shows
0
and
H
, this means the cooking zone is still hot.
Prerequisites:
The cooktop is switched on.
Press sensor buttons and simultaneously and
then one more time.
All cooking zone indicators display power level
0
. The
child safety lock is deactivated.
INFO If you first press , 1 minute is pre-set as the
start time.
If you first press , 30 minutes are pre-set as
the start time.
Switching off the timer signal tone
Press any sensor button on the operating panel to end
the signal tone prematurely.
Setting the short time (egg timer)
Press and simultaneously.
In the timer display
00
will appear for a few seconds on
both rear cooking zone indicators.
Press or to set the required time.
Setting the automatic cut-off (timer)
You can set an automatic cut-off for every cooking zone.
INFO The cooking zone control light indicates
whether the automatic cut-off is activated. The
cooking zone indicator light lights up until the
cooking zone is switched off after the pre-set
time has passed.
INFO If several cooking zones are activated with an
automatic cut-off, the cooking zone indicator
light with the lowest timer value will light up
provided that a cooking zone was not selected.
Prerequisite
A cooking zone has been selected.
A power level was set.
Press and simultaneously.
In the time display
00
will appear for a few seconds on
both rear cooking zone indicators.
Press or to set the required time.
After the last input, the set time will be displayed in the
timer display for a few seconds.
Changing the timer settings
Press the cooking zone button for the cooking zone,
for which you wish to change the automatic cut-off.
Press and simultaneously.
In the timer display, the set time is displayed and the
cooking zone indicator light flashes.
Press or to set the required time.
If several timers are active
Continue pressing and simultaneously until
the indicator light for the desired cooking zone starts
flashing.
The cooking zone control lights are controlled in a
clockwise order for which a timer was activated,
beginning with the short time (egg timer).
Press or to change the set time.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BIU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BIU in the language / languages: English as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BIU

Bora BIU User Manual - German - 44 pages

Bora BIU User Manual - Dutch - 44 pages

Bora BIU User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info