552044
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
In consideration of the shown distanc-
es, hold the guide (a) at the top and
bottom inside of the furniture door; mark
the positions of the drill holes. After
drilling, fix the guide with the screws
provided.
Insert the cover (c) until it clicks in the
guide (a).
Fully open the appliance and furniture
door and join them together. Slide the
bracket (b) in the guide (a) and mark
the drill holes. Remove the bracket and
drill Ø 2 mm holes with about 8 mm
distance to the outer door edge. Put the
bracket on again; secure it with the
screws provided.
If an aligning of the furniture door is
necessary, use the slot spacing. Check
if the door is arranged vertical as well
as horizontal, so that a smooth opening
and closing of the door is ensured.
Insert the cover (D) until it clicks on the
angle (B).
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
After transport, the appliance should be left standing
upright for about 4 hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Starting the appliance
Starting the applianceStarting the appliance
Starting the appliance
Connect the appliance to the power supply.
Operate the temperature control. See also the
following section "Settings".
Settings
SettingsSettings
Settings
Setting [0] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [1–7] regulates the different values
of the internal temperature.
Setting 0
Setting 0Setting 0
Setting 0
Sett
SettSett
Setting 1
ing 1ing 1
ing 1
Setting 7
Setting 7Setting 7
Setting 7
Off state Lowest setting
(warmest inside
temperature)
Highest setting
(coldest inside
temperature)
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
During initial operation, turn the temperature control
to the highest setting first, until the appliance has
reached the desired operating temperature. After-
wards it is recommended to turn the control back to a
medium setting; correcting the temperature at a later
point would then be easier.
Interior light
Interior lightInterior light
Interior light
When opening the appliance door, the interior light
will turn on automatically.
Storing food
Storing foodStoring food
Storing food
NOTE:
NOTE:NOTE:
NOTE:
Recommendation!
Recommendation!Recommendation!
Recommendation!
To guarantee that the temperature is low enough,
you should pre-cool the appliance a few times before
initial loading foods.
CAUTION:
CAUTION:CAUTION:
CAUTION:
Always pay attention to the storage instructions on
the sales packaging.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann VSE 228.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann VSE 228.1 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann VSE 228.1

Bomann VSE 228.1 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info