552044
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
Remove for that the appliance content and stor-
age at a cool location.
Clean the thaw water discharge channel / opening
carefully e.g. with a pipe cleaner.
After everything was thoroughly dried, you can
restart the operation.
Defrosting
DefrostingDefrosting
Defrosting
The appliance has an automatic defrosting system.
During defrosting water drops drains off at the back
of the cooling chamber. The thaw water running
through a channel, is collected in a drip tray located
on the compressor, where it will evaporate. Make
sure the water discharge opening does not get
clogged. A light formation of ice on the interior back
during operation is normal.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
Never use metal objects (e.g. knifes) to remove ice
from the evaporator. Otherwise it can be damaged.
A defect evaporator can cause serious damage.
Reverse
Reverse Reverse
Reverse the bulb
the bulbthe bulb
the bulb
La
LaLa
Lamp specifications: 220
mp specifications: 220mp specifications: 220
mp specifications: 220-
--
-240 V
240 V240 V
240 V~
~~
~, max. 15 W
, max. 15 W, max. 15 W
, max. 15 W
Unscrew the screw of the lamp cover.
Press on the lamp cover and remove it to the
back.
Replace the defective bulb.
Reattach the lamp cover and tighten the screw.
Reconnect the appliance and switch on.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Before you contact an authorized specialist
Before you contact an authorized specialistBefore you contact an authorized specialist
Before you contact an authorized specialist
Problem
ProblemProblem
Problem
Possible cause
Possible causePossible cause
Possible cause
Solution
SolutionSolution
Solution
The appliance is
not working
properly or at all
- Is the unit not connected to mains power?
- Is the temperature properly set?
- Is the place unqualified?
- Does the content prevent the appliance
door from closing properly?
- Are the ventilation openings clear of ob-
struction?
- Insert the plug properly in the contact socket.
Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
- Check the appliance content.
- Unblock the ventilation openings, install the
appliance freely.
The content is
too warm
- Is the temperature set properly?
- Was the appliance door open for an ex-
tended period?
- Was large quantity of food placed in the
appliance within the last 24 hours?
- Is the appliance near a heat source?
- Check the temperature setting.
- Open the door only as long as necessary.
- Set a colder temperature.
- Check the location (see “Installation”).
Loud noise dur-
ing operation
- Does the appliance not stand vertical or
horizontal?
- Check the appliance position.
- See the section “Operating noise”.
Water on the
bottom
- Is the temperature set properly?
- Is the water discharge channel / opening
blocked?
- Check the temperature setting.
- Clean the water discharge channel / opening.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann VSE 228.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann VSE 228.1 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann VSE 228.1

Bomann VSE 228.1 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info