686434
23
Zoom out
Zoom in
Previous page
1/26
Next page
23
MWG3001HEB_IM 12.07.2018
Function Programme Display
Beverages
1 cup
2 cups
Potatoes
0.45 kg
0.65 kg
Pizza 0.2 - 0.4 kg
Fish 0.2 - 0.7 kg
Defrosting
Using the defrost program you may automatically defrost your food.
NOTE:
Since the microwaves always penetrate the food from the outside
in, larger pieces may not be fully defrosted in their centre. The outer
layers may already have started to cook.
In case the weight of the food is less than 200 g, place it on the edge
and not in the center of the glass tray.
Turn over foods such as meat, sausage, bread once after approx. half
the defrosting time.
Factor in a compensation time after the defrost program. This is a
standing period during which a temperature compensation takes
place through conduction of heat from the outside (defrosted) to the
inside (frozen). You can leave the food in the switched of appliance or
outside the appliance during the compensation time. The compensa-
tion time should be at least as many minutes as the defrost time in the
microwave. It depends on the condition of the food.
You can shorten the compensation times by e. g. separating small
pieces of meat or crumbling the remaining frozen chunks of mince
after the defrosting time. For sliced bread or sausage, separate the
slices during the compensation time.
Allow fruit to defrost in a bowl with a lid. After around half the defrost
time, gently stir the fruit once.
Cakes or tarts with chocolate icing should not be defrosted in the
microwave.
To use the defrost program, proceed as follows:
1. Determine the weight of the food.
2. Remove the food from its packaging. If it cannot be removed from the
packaging, defrost for 30 seconds on maximum microwave power (see
“Quick Start”).
3. Place the food to be defrosted onto the plate (fruit into a bowl). Also
place meat onto a upturned saucer so that the meat juices can drain.
This saucer should never be used for other foods or come into contact
with them.
4. Press the DEFROST / AUTO / TEMP / CLOCK button and select the
defrost program “
”.
5. Use the turning knob to set the desired weight.
6. Press the START button to start operation.
Gradual Cooking
You can set the programs in such a way that up to 4 different functions
can be carried out in succession.
It is assumed you choose the following functions for cooking:
Heating with microwave
Roasting
1. Press the MICRO button once / repeatedly to select the desired micro-
wave power setting.
2. Use the turning knob to set the desired cooking time between
10 seconds and 60 minutes.
3. Press the COMBI / GRILL / CONV button until “
”appears on the
display.
4. Use the turning knob to set the desired cooking time between
10 seconds and 60minutes.
5. Press the START button to start operation.
NOTE:
The change of program is indicated by an acoustic signal.
WARNING: Risk of burns!
Only touch the door at the frame.
NOTE:
The automatic programs cannot be used for gradual cooking.
Special Functions
Auto Start (Timer-Function)
The maximum time-delay is 23 hours and 59 minutes.
NOTE:
First set the clock! Otherwise you may not use this function.
When using auto start, the defrost function is not available. This
program setting does not support quick start cooking.
Example: It is 10:45 h. You want to program the microwave so that it
operates at maximum power for 7 ½ minutes at 14:20. Proceed as follows
for automatically starting the microwave:
Step Button Display
1 MICRO
(Power)
2
(Cooking time)
3
Hold down the DEFROST /
AUTO / TEMP / CLOCK
button for 3 seconds.
(Current time)
4
(Setting the hours)
5
DEFROST / AUTO /
TEMP / CLOCK
(Conrmation of hour)
6
(Setting the minutes)
7
DEFROST / AUTO /
TEMP / CLOCK
(Current time)
NOTE:
The timer function is activated when the “
” icon is ashing in the
display.
During this programmed setting the functions of the controls are
blocked (except: DEFROST / AUTO / TEMP / CLOCK, STOP / CAN-
CEL and START).
Press the START button, if you want to start the cooking process
beforehand. The microwave starts with the previously selected
settings.
If you wish to display the start time again, press the DEFROST /
AUTO / TEMP / CLOCK button.
In order to deactivate the automatic start time, press the STOP /
CANCEL button.
When the pre-set time has been reached, the microwave will start
operation. A beep indicates the start.
WARNING: Risk of re!
Always supervise the appliance during operation.
When using the time-delay function, set the time in such a way that
the appliance will be operating under proper supervision.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann MWG 3001 HEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann MWG 3001 HEB in the language / languages: English, German as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info