652470
16
Zoom out
Zoom in
Previous page
1/24
Next page
16
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an electric
electric electric
electric
shock
shockshock
shock!
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
The accessibility of the power plug must be en-
sured in order to disconnect the appliance from
the power supply in case of an emergency.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
In case of disconnection or power failure:
- wait for approx. 5 minutes before restarting;
- check the operation settings.
Ensure that your mains power corresponds with
the specifications of the appliance. The specifica-
tions are printed on the rating label.
Connect the mains cable to a properly installed
and earthed wall outlet.
Reverse the Door Opening
Reverse the Door OpeningReverse the Door Opening
Reverse the Door Opening
If required, the door opening can be moved from the
right (delivery condition) to the left side.
WARNING:
WARNING:WARNING:
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply. Always unplug
the appliance first.
NOTE
NOTENOTE
NOTE:
::
:
When installing, ask another person to assist.
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
Remove the cover (a) of the upper door hinge (b)
and dismount it by loosening the screws under-
neath.
Open the appliance door a little and take it care-
fully of the lower door hinge. Place the door on a
padded surface to prevent it from scratches.
Move the cap (c) to the opposite holes.
Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet. Dismount the
lower door hinge (d) and the holding device (e) by
loosening the screws.
Rotate the hinge (d) and the holding device (e)
about 180° and replace the items after you have
unscrewed the hinge pin and used by the other
hinge side. Tighten all screws and turn in the feet
accordingly.
Replace the appliance upright again. Insert the
appliance door on the lower hinge pin and fix the
door to the property position.
Transfer the upper door hinge (b) accordingly. Put
the hinge pin in the hole of the appliance door
and
tight the hinge. Put on the hinge cover (a) again.
Check if the door is arranged vertical as well as
horizontal, so that a smooth opening and closing
of the door is ensured.
Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
instructions in "Assembling the door handle".
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
After transport, the appliance should be left standing
upright for about 4 hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 235 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info