652470
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
Remove all packaging material, such as foils, filler
and cardboard packaging.
To prevent hazards, check the appliance for any
transport damage.
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION:
CAUTION:CAUTION:
CAUTION:
T
TT
Transport protection!
ransport protection!ransport protection!
ransport protection!
Pull off the foil from the appliance sides.
Remove the Styrofoam part between appliance
back and condenser (metal grille).
NOTE
NOTENOTE
NOTE:
::
:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Overview
Appliance OverviewAppliance Overview
Appliance Overview
1
11
1 Temperature control / Interior light with on/off
switch
2
22
2 Height-adjustable grid shelves
3
33
3 Grid shelf above the compressor
4
44
4 Adjustable feet at the front; wheels at the back
Delivery scope
Delivery scopeDelivery scope
Delivery scope
5 x grid shelf, 1 x door handle incl. fixing screws with
covers
Installat
InstallatInstallat
Installation
ionion
ion
Condition
ConditionCondition
Conditions for the installation location
s for the installation locations for the installation location
s for the installation location
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance must be creat-
ed for this purpose.
- Gap to the appliance back about 5 cm and to
the side walls each about 10 cm;
- Clearance to the front must be created so that
the appliance door can open without being im-
peded.
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
Install the appliance for the wall socket to be
freely accessible.
Avoid the installation:
Avoid the installation:Avoid the installation:
Avoid the installation:
- near heaters, next to a stove, direct sunlight or
any other heat sources;
- at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.) and in rooms which
may have poor air circulation (e.g. garages).
- Do not expose the appliance any weather.
Assembling the door handle
Assembling the door handleAssembling the door handle
Assembling the door handle
Attach the door handle with the sup-
plied screws to the holes on the door
outside (left side, delivery condition).
Put included screw covers on.
CAUTION:
CAUTION:CAUTION:
CAUTION:
To prevent damage, do not tighten the screws too
tight.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 235 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info