652470
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
Cleaning
CleaningCleaning
Cleaning
and Maintenance
and Maintenanceand Maintenance
and Maintenance
WARNING:
WARNING:WARNING:
WARNING:
Always turn off the appliance and disconnect the
plug or turn off / unscrew the fuse before cleaning
and user maintenance.
Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock!Risk of electric shock!
Risk of electric shock! Hot steam could damage
the plastic parts.
The appliance must be dry before restarting oper-
ation.
C
CC
CAUTION:
AUTION:AUTION:
AUTION:
Do not use a wire brush or other sharp, abrasive
items.
Do not use any acidic or abrasive detergents.
Do not damage the refrigerant circuit.
Cleaning the appliance including interior
Cleaning the appliance including interiorCleaning the appliance including interior
Cleaning the appliance including interior
Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent.
Remove the appliance content and storage at a
cool location.
Clean the thaw water discharge channel / opening
carefully with e.g. a pipe cleaner.
After everything was thoroughly dried, you can
restart the operation.
Wipe at least once a year the dust that has accu-
mulated on the appliance back and condenser
(metal grille). To do this, use a soft brush or a
vacuum cleaner.
Defrosting
DefrostingDefrosting
Defrosting
The appliance has an automatic defrost. During de-
frosting water drops drains off at the back of the cool-
ing chamber. This thaw water running through a
channel, is collected in a drip tray located on the
compressor, where it evaporates. Make sure that the
water discharge opening does not get clogged.
Reverse th
Reverse thReverse th
Reverse the bulb
e bulbe bulb
e bulb
Lamp specifications: LED E14
Lamp specifications: LED E14 Lamp specifications: LED E14
Lamp specifications: LED E14 -
--
-
1 W
1 W 1 W
1 W -
--
-
220
220220
220-
--
-240 V
240 V240 V
240 V~
~~
~
Remove the lamp cover.
Replace the defective bulb.
Reattach the lamp cover.
Reconnect the appliance and put into operation
again.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Before you contact an authorized specialist
Before you contact an authorized specialistBefore you contact an authorized specialist
Before you contact an authorized specialist
Problem
ProblemProblem
Problem
P
PP
Possible cause
ossible causeossible cause
ossible cause
Solution
SolutionSolution
Solution
The appliance is
not working
properly or at all
- Is the unit not connected to mains power?
- Is the temperature properly set?
- Is the place unqualified?
- Does the content prevent the appliance
door from closing properly?
- Are the ventilation openings clear of ob-
struction?
- Insert the plug properly in the contact socket.
Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
- Check the appliance content.
- Unblock the ventilation openings, install the
appliance freely.
The content is
not cold enough
- Is the temperature set properly?
- Was the appliance door open for an ex-
tended period?
- Is the appliance near a heat source?
- Check the temperature setting.
- Open the door only as long as necessary.
- Check the location (see “Installation”).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 235 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info