651949

Bomann ES 184 CB Manual

56
Zoom out
Zoom in
Previous page
1/106
Next page
56
1. Remove the cover. Use the small grip. Turn slightly for easy
removal. Use a damp cloth to hold the steam nozzle with
one hand!
2. Use the spanner (18) to remove the small pipe from the
steam nozzle. See Fig. C on page 3. Turn the spanner
clockwise.
3. Leave pipe and cover for some time in the warm sudsy
water. In this way milk residue is easily removed.
4. Wipe the steam nozzle on the appliance with a damp cloth.
NOTE:
Fill a container with hot water to remove dry residue.
Place the container under the steam nozzle, so that it is
submerged.
5. After cleaning replace pipe and cover on the steam nozzle.
Place a heat-resistant empty container under the steam
nozzle. Operate the appliance as instructed under “Making
Cappuccino” points 5 and 6. After cleaning the steam
nozzle is again ready to use.
Decalcication
Scale deposits put the functionality of your appliance at risk. It
is necessary to decalcify the appliance regularly. The intervals
depend on use frequency and water hardness.
Decalcify with a commercial decalcier for coffee machines.
1. Dose as instructed on the packaging or on the instruction
leaet.
2. Operate the appliance as instructed for making espresso
until the tank is empty. Let the solution ow through the
group head (without lter holder).
WARNING:
• Rinse the water tank and let one full tank fresh water
ow through the group head to rinse out the decalcier
residues.
• Do not use this water for making espresso.
Storage
• Clean the appliance as instructed. Let the accessories dry
completely.
• We recommend that you keep the appliance in the original
packaging if the appliance will be not used for long periods.
• Always keep the appliance out of the reach of children in a
dry, well ventilated place.
Troubleshooting
Problem Possible cause Solution
The appliance
does not func-
tion.
The appliance has
no power supply.
Test the socket with
another appliance.
Plug in the mains plug
correctly.
Check the main circuit
breaker.
Problem Possible cause Solution
The appliance
does not func-
tion.
The appliance has
not been bled before
rst-time use.
Bleed the appliance as
instructed under “First
Use/Bleeding”.
The appliance is
faulty.
Contact our service
center or a specialist.
No coffee
output.
Switch the appliance off!
The water tank is
empty.
Fill the water tank with
fresh water.
The water tank is not
properly attached;
the valve is not
open.
Press the tank slightly
down for the valve to
open.
The holes in the
lter holder and the
group head outlet
are blocked.
Clean lter holder, lter
and group head outlet.
Air entrapped in the
heating circuit.
Generate steam as in-
structed under “Making
Cappuccino”. Open
the steam control knob
all the way towards
“
”.
The coffee grounds
are too ne or com-
pressed too much.
Loosen the coffee
grounds. Spread it
evenly and only slightly
compress with the
tamper.
Scale deposits in the
appliance.
Decalcify the appliance
as instructed.
The pump is
noisy.
Switch the appliance off.
The water tank is
empty.
Fill the water tank with
fresh water.
The water tank is not
properly attached;
the valve is not
open.
Press the tank slightly
down for the valve to
open.
Air entrapped in the
water circuit.
Bleed the appliance as
instructed under “First
Use/Bleeding”.
Espresso
escapes at the
lter holder
edge.
Stop the brewing process!
The lter holder
is not properly
attached or is not
enough closed.
Attach the lter holder
properly as instructed
under “Attach / Detach
Filter Holder”.
Too much coffee
grounds in the lter
insert.
Remove excess coffee
grounds. Observe the
MAX marking in the
lter insert.
Coffee grounds
residues on the rub-
ber seal of the group
head.
Switch the appliance
off and let it cool
down.
Clean the rubber seal
as instructed.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann ES 184 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann ES 184 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info