Manual Bomann EHBC 7935 IX (page 28 of 40) (English, German)

814385

Zoom out

Zoom in

1/40

min. 760 mm

50 mm

35 mm

Air intake 30 mm

Air outlet 5 mm

Cabinet opening and appliance dimensions

Prepare the cabinet opening according to the dimen-

sional drawings.

Dimensions in mm

Preparing the worktop for installation of the hob

CAUTION:

Before sawing, tape the outer edge of the cut-out

with wide tape to avoid marks from the jigsaw on the

worktop.

• The worktop must be horizontal and sealed on the

wall side against overflowing liquids or moisture.

• The hob must be framed all around by at least

50 mm of worktop.

• The cut surfaces (cut-out edges) must be sealed

with special lacquer, silicone rubber or casting

resin to prevent swelling due to moisture.

• Clean and dry the worktop in the cutout area thor-

oughly.

Worktop cutout

Prepare the cutout of the worktop according to the di-

mensional drawing.

Dimensions in mm

Installing the hob

CAUTION:

Place the hob with the top of the cooking surface on

a padded surface to prevent damage.

• First check the factory-fitted hob seal at the hob

frame for integrity and exact fit.

• Attach the enclosed retaining clips with the

screws in the holes provided on the side of the

hob.

• Place the hob in the center of the pre-calculated

cutout in the worktop as shown in the hob illustra-

tion under

"Appliance overview"

and with the con-

nection cable first. Make sure that the distances to

the cut-out are the same on all four sides and that

the seal rests on the worktop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHBC 7935 IX in the language / languages: English, German as an attachment in your email.

The manual is 1.09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann EHBC 7935 IX Manual

Product: