814385
27
Zoom out
Zoom in
Previous page
1/40
Next page
27
1
Residual heat
indicator
2
Ø200 mm / 1800W
3
Ø165 mm / 1200W
4
Ø200 mm / 1800W
5
Ø165 mm / 1200W
Delivery scope
1x standard oven tray 1x grill grid
1x set of side rack 4x mounting screws
Installation
The built-in oven is designed for installation in stand-
ard kitchen units.
WARNING:
The installation and the connection to the main power
may only be performed by an authorized specialist.
CAUTION:
The worktop, the cabinet, veneers, plastic coat-
ings, used adhesives etc. must be sufficient heat-
resistant (min. 100°C).
To ensure a sufficient cooling air supply, no heat
protection strips may be installed.
If there is a drawer below the furnace or it is at-
tached, an intermediate shelf is required.
NOTE: Recommendation!
When installing, ask another person to assist.
Wear protective gloves to avoid injuries at possi-
ble sharp edges.
When inserting, use the recessed grips on the
side of the housing to lift the unit. Caution! Do not
carry or hold the appliance by the door handle.
Do not install the appliance directly next to refrig-
erators or freezers. The heat dissipation will un-
necessarily increase its energy consumption!
Before installation, check that the appliance and
furniture dimensions match.
Hob and oven must be from the same manufac-
turer and marked with the same type of designa-
tion.
The oven and hob must be positioned centrally to
each other.
Safety distances
CAUTION:
Make sure that adequate air circulations ensured,
and the ventilation slots are not blocked. Follow ap-
propriate safety distances!
The appliance must be installed so that heat can
be dissipated. The ventilation openings must not
be blocked
(see illustration).
Maintain sufficient distance behind the appliance
at the installation site so that the appliance can
work efficiently and well.
The distance between the hob and the cooker
hood must be at least as large as specified in the
installation instructions for the hood!
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EHBC 7935 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHBC 7935 IX in the language / languages: English, German as an attachment in your email.

The manual is 1.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info