379762
23
Zoom out
Zoom in
Previous page
1/94
Next page
23
11. SANDWICH
SANDWICHSANDWICH
SANDWICH (Sandwich) To prepare light sandwich bread
12. BACKEN
BACKENBACKEN
BACKEN (Bake)To brown bread or cakes
Bread
Bread Bread
Bread Baking
BakingBaking
Baking Machi
Machi Machi
Machine Functions
ne Functionsne Functions
ne Functions
Buzzer function
Buzzer functionBuzzer function
Buzzer function
The buzzer goes off:
When pressing all the program keys;
During the second kneading cycle of the NORMAL, VOLLKORN, SCHNELL, ULTRA SCHNELL, KUCHEN
and SANDWICH programs to signal that the cereals, fruit, nuts or other ingredients can be added.
When the end of the program is reached.
During the warming phase at the end of the baking procedure the acoustic signal rings several times
Repeat function
Repeat functionRepeat function
Repeat function
In case of a blackout the bread baking machine must be started again. This is possible only if the program was
stopped before the kneading phase was reached. Otherwise you will have to start from the beginning!
Safety functions
Safety functionsSafety functions
Safety functions
If the temperature of the appliance is still too high (more than 40°C) for a new program after using the appliance
previously, H:HH will appear on the display when pressing start again and an acoustic signal is given. If this is
the case, press the START/STOP key until the H:HH message is deleted and the basic setting appears on
the display. Remove the container and wait until the appliance has cooled.
The BACKEN program can be started immediately even when the appliance is still hot.
Commissioning and
Commissioning and Commissioning and
Commissioning and Bread Baking Machine Program phases
Bread Baking Machine Program phasesBread Baking Machine Program phases
Bread Baking Machine Program phases
Insert the baking tin
Insert the baking tinInsert the baking tin
Insert the baking tin
The nonstick baking tin must be inserted slightly to left (counter-clockwise) and it snaps into place in the middle
of the base in the baking compartment. Then turn the tin firmly clockwise. To remove the baking tin repeat the
same procedure but in the opposite order.
Put in the ingredients
Put in the ingredientsPut in the ingredients
Put in the ingredients
The ingredients must be put into the baking tin in the order specified in the relevant recipe.
Select the program
Select the programSelect the program
Select the program
1. Insert the plug in a correctly installed 230 V, 50 Hz socket with earthing contact.
2. Set the On/Off switch (l) at the rear of the appliance to " I “.
3. Select the desired program with the SELECTION-key.
4. Then select the desired degree of browning.
5. Use the TIME-keys to set the time when the program is to be started.
6. Press the START/STOP-keys.
Leave the dough to rise
Leave the dough to riseLeave the dough to rise
Leave the dough to rise
After the last kneading cycle the bread baking machine is heated to the optimal temperature for the rising of the
dough.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann cb 593 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann cb 593 in the language / languages: English, German, Dutch, Polish, Portuguese as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info