Manual Bomann BS 1949 (page 44 of 74) (English, German, Dutch, French, Italian, Polish, Spanish)

687988

Zoom out

Zoom in

1/74

BS1949ACB_IM 20.10.16

Using the Device

You can use the appliance as a oor vacuum cleaner or as a

handheld and upright vacuum cleaner (basic unit).

1. Disconnect the appliance from the mains when changing

the accessory.

2. Turn on the device.

3. Select a power level.

NOTE:

We recommend the higher power level for using the

appliance with the oor nozzle.

End of Operation

1. Turn off the device.

2. If you have already installed the wall holder, hang up the

vacuum cleaner. You can attach the crevice / brush nozzle

and the upholstery nozzle at the left and the right of the

vacuum cleaner.

Maintenance

Emptying the Dust Collector

1. Disconnect the appliance from the power supply unit.

2. If necessary, remove the suction tube or the nozzle

attachment from the appliance.

3. Hold the appliance with the bottom plate of the dust

collector over a dustbin.

4. Empty the contents of the dust

collector. Slide the opener of

the dust collector downwards to

open the bottom plate.

5. Then close the base plate

again. The lock on the dust

collector must engage.

The Filter System

Your appliance features 3 lters. The common dust bag

system has been replaced by a transparent dust collector.

The higher ow speed of the collector allows for heavy dirt

and smallest oating particles to be separated from the

“sucked-in air”.

It is thus not necessary to buy dust bags.

The lters must be cleaned periodically.

CAUTION:

• Never wash the lter in the washing machine.

• Do not use a hairdryer for drying.

• Only put the appliance back into operation when all l-

ters are completely dry and correctly assembled.

The Filter Unit

The lter unit is composed of:

• HEPA lter

• Coarse lter

Proceed as follows to clean

the lter unit:

1. Empty the dust container as described above. (Steps 1 - 5)

2. Disassembly of the lter unit

2.1 Press the dotted area of the button (1) to disconnect

the dust container from the motor housing.

2.2 Turn the cover of the dust contain-

er in the direction . Remove

the cover.

2.3 Pull the lter unit from the dust

container.

2.4 Turn the HEPA lter to remove it

from the coarse lter.

3. You can brush out the HEPA lter. In case of heavy

staining, clean the lters under running water.

4. Let the lters air-dry completely before retting them!

5. Wipe the dust collector with a damp cloth and then wipe

it dry.

6. Assembly of the lter unit

6.1 The HEPA lter has 3 guide lugs. Set the largest

guide lug into the largest recess of the coarse lter.

Tighten the HEPA lter by turning it clockwise. It must

audibly engage.

6.2 Set the lter unit into the dust

container. The rounded guide lug

must sit exactly in the rounded

recess.

6.3 Reattach the cover to the dust

container. Set the arrow ( ) on the

cover just over the arrow at the

side of the symbol .

6.4 Tighten the cover in the direction . It must audibly

engage.

6.5 Reattach the dust container to the motor housing. Set

the dust container rst at the bottom part to the motor

housing, so that the electric contacts are matched.

Then engage it to the top. For this, press the smooth

area of the button (1).

Outlet Filter

The appliance is also equipped with an outlet lter. It is on the

right side of the appliance.

CAUTION:

You cannot remove this lter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann BS 1949 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann BS 1949 Manual

Product: