687988

Bomann BS 1949 Manual

42
Zoom out
Zoom in
Previous page
1/74
Next page
42
BS1949ACB_IM 20.10.16
CAUTION:
• The ambient temperature should be between 0 °C and max. 45 °C.
Heat damages the rechargeable battery. Increasingly lower tem-
peratures reduce the capacity and the life of the rechargeable
battery.
• Do not charge the rechargeable battery unsupervised.
• Use only the mains adapter “ZD12D265050EU” included in the
scope of deliveries.
• Disconnect the power supply unit from the mains when you will
not use the device for a longer time.
Overview of the Components / Delivery Scope
1 Button for unlocking / locking the lter unit
2 LED charge indication
3 Multifunction button / + / –
4 Carrying handle
5 Socket for connection of the power supply unit
6 Dust collector base plate
7 Dust collector with HEPA lter
8 Lock of the dust collector
9 Opener of the dust collector
10 Suction tube
11 Unlocking the  oor nozzle
12 Button for unlocking the brush roller
13 Floor nozzle with turbo brush
14 Unlocking for suction pipe or nozzle attachment
15 Adapter for the nozzle attachment
16 Combined crevice / brush nozzle
17 Upholstery brush
18 Wall holder
Not shown:
1 x Mains adapter
2 x Wall plug
2 x Screw
Unpacking the Device
1. Remove the device from its packaging.
2. Check the delivery scope for completeness.
3. Check the device for any transport damage, in order to
prevent hazards.
NOTE:
In case of any transport damage, contact your dealer
immediately. Do not use a damaged device!
4. Remove the transport lock from the multifunction button.
Notes on Use
• The device is especially suitable for quickly vacuuming
small amounts of dry dirt or dust.
• The device is operated via charged battery. Charging is
done via the supplied power supply unit.
• Direct power supply via mains adapter is not possible.
Multifunction Button (
/ + / –)
Use the multifunction button to turn the device on and off.
Also select a power level with this button.
Press once = Turn on the device, low power level
Press twice = Select high power level
Press three times = Turn off the device
Start-up
Suction Tube
• Insert the suction pipe with the two contact pins into the
connection on the hand unit. It must audibly engage.
• To disconnect the suction pipe, press the release (14) and
pull out the pipe at the same time.
Floor Nozzle with Turbo Brush
The  oor nozzle is suitable for any  oor covering. During
operation, the LEDs on the  oor nozzle light up for better
visibility in dark areas.
CAUTION:
You cannot replace the LEDs.
• Slip the lower end of the suction pipe onto the connector
on the  oor nozzle. Pay attention to the contact pin. The
suction pipe must audibly engage.
• To release the suction pipe, push the release (11) away
from the suction pipe and pull out the pipe at the same
time.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann BS 1949 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann BS 1949 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info