640549

Blomberg WM 67120 NBL00 Manual

31
Zoom out
Zoom in
Previous page
1/40
Next page
31 EN
Cycle time takes longer
than the time specified in
the owner’s guide.
Water pressure may be low.
The washer will wait until there is a
sufficient amount of water, which
may lengthen the cycle time to
avoid poor washing results due to
insufficient water.
Supply voltage may be low.
Cycle time is lengthened to avoid
poor washing results when the
supply voltage is low.
Inlet temperature of water may
be low.
Cycle time lengthens to heat up
the water when the inlet water is
cold. Also, washing time can be
lengthened to avoid poor washing
results.
There may be an imbalance of
load in the drum.
The automatic spin correction
system might have been activated
due to the unbalanced distribution of
the laundry in the drum.
Number of rinse cycles might
have increased to obtain a better
rinse.
Use a proper amount of HE
detergent. Reduce the amount of
detergent next time you operate the
washer.
It continuously washes.
Remaining time does not
count down.
In the case of a paused
countdown while taking in water:
Timer will not countdown until the
washer is filled with the correct
amount of water. Time will not
count down until the selected
temperature for the program is
reached
The washer will wait until there is a
sufficient amount of water to avoid
poor washing results due to lack of
water. Then the timer will start to
count down.
In the case of a paused
countdown at the heating step:
Time will not count down until
the selected temperature for the
program cycle is reached.
In the case of a paused
countdown at the spinning step:
There may be an imbalance of
laundry in the drum.
The automatic spin correction
system might have been activated
due to the unbalanced distribution of
the laundry in the drum.
The laundry in the drum may be
tangled up too much. Laundry
should be rearranged and re-spun.
No spinning is performed when the
laundry is not evenly distributed in
the drum to prevent any damage to
the appliance and to its environment.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg WM 67120 NBL00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WM 67120 NBL00 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info