Manual Blomberg WM 67120 NBL00 (page 30 of 40) (English)

640549

Zoom out

Zoom in

1/40

30 EN

There is water coming

from the bottom of the

washer.

Inlet hose connections may be

leaking.

Be sure the strainers and rubber

seals of the water inlet hoses are

solid and securely fitted.

End of the drain hose may be

loosely inserted into the waste

pipe or sink.

Tightly attach the drain hose to the

waste pipe or sink (See «Installation

Instructions, Drainage»).

House drain may be clogged.

If the house drain pipes are clogged,

call a plumber for assistance.

Filter cap of the drain pump may

not be properly fitted.

Make sure that the pump filter cap is

tightly closed.

Hose connections inside the

washer may be leaking.

Internal hose connections (e.g.

dispenser hoses, drain system)

should be checked by a service

technician.

Washer fills with water

when a process is

cancelled.

There may be hot water inside

washer.

For safety reasons, water should be

cycled in and out a couple times.

Time delay function does

not work.

Door may not be closed properly. Close the loading door.

The door will not open.

Water level might be above the

lower level of the door.

Run“Drain”,“Spin”or«Drain&Spin»

program.

Washer might be heating up the

water or it may be at the spinning

cycle.

Wait until the process is over.

Due to electrical safety

mechanism, the door can only be

opened a few minutes after the

program has stopped.

Wait until the process is over.

The door will not lock.

Door is not properly closed/Door

hinge is not aligned with lock

switch.

Check for any bulky or large items

obstructing the door to be closed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WM 67120 NBL00 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg WM 67120 NBL00 Manual

Product: