640549

Blomberg WM 67120 NBL00 Manual

23
Zoom out
Zoom in
Previous page
1/40
Next page
23 EN
Time delay can be set with steps of one
hour for the first three hours and with
steps of three hours for the remainder
(1, 2, 3, 6, 9, …24).
C
Do not use liquid detergent when you
set time delay! Risk of staining of the
clothes.
1. Open the loading door, place
the laundry inside and fill detergent
disperser.
2. Set the washing program, spin speed
and, if required, select the auxiliary
functions.
3.Press“TimeDelay”buttongradually
to adjust the desired time.
4.Press“Start/Pause/Cancel”button.
The time delay will start to count down.
The “:” in the middle of the displayed
time delay will start flashing.
C
More laundry may be loaded during
the time delay period.
5. At the end of countdown process,
“:” will light up continuously, “Ready”
light will go off and the relevant program
follow-up light will come on according to
the selected program.
Changing the delay time
If you want to change the time during
the countdown:
1.Press“Start/Pause/Cancel”button.
“:” in the middle of the screen will stop
flashing.
2.Press“TimeDelay”buttontoadjust
the desired time delay.
3.Press“Start/Pause/Cancel”button.
4. The “:” in the middle of the displayed
time delay will start flashing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1.Press“Start/Pause/Cancel”button.
The “:” in the middle of the displayed
time delay will stop flashing.
2.Press“TimeDelay”buttonto
decrease the time delay. “0:00” will
appear on the display eventually.
3.Press“Start/Pause/Cancel”buttonto
start the program.
Starting the Program
1.Press“Start/Pause/Cancel”buttonto
start the program.
2.Programfollow-uplamp“wash”
showing the startup of the program will
light up.
Progress of program
Progressofarunningprogramisshown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will light up
and light of the completed step will turn
off. The indicator that is lit up at the far
right of the series of indicator indicates
the step that is being carried out.
C
If the washer is not spinning, the
automatic spin correction system has
been activated due to an excessive
unbalanced distribution of laundry in
the drum.
Changing the selections after
the program has started
Turning the cycle selector knob while
the cycle selector is in a normal flow will
not change the program.
Switching the washer to standby
mode
Press“Start/Pause/Cancel”button
momentarily to switch your washer
tothestandbymode.“Start/Pause/
Cancel” lamp will start flashing to
indicate that the washer is switched to
standby mode.
Selecting or canceling an auxiliary
function in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step
the program is at. For example, if your
washer is on the main wash cycle or on
the first rinse cycle, you may select extra
rinse auxiliary function.
Super wash option may not be selected
on any circumstances once the wash
cycle begins.
Quick wash option may only be selected
when your washer is on the main wash
cycle.
C
The spin speed which is selected
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg WM 67120 NBL00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WM 67120 NBL00 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info