Manual Blomberg WM 67120 NBL00 (page 25 of 40) (English)

640549

Zoom out

Zoom in

1/40

25 EN

6 Quick instructions for daily use

Preparation

1. Turn on both hot and cold water

faucets fully. Check and be sure the

water connection is tight.

2.Placethelaundryinthedrum.

3. Add laundry additives (e.g. detergent,

fabric softener,bleach).

Starting

1.Pressthe“On/Off”button.

2. Select the appropriate wash cycle

and temperature suitable for your

items.

3. If required:

– select any auxiliary function,

– adjust the spin speed,

– set the time delay,

4. Close the loading door.

5.Press“Start/Pause/Cancel”button.

The display shows the time remaining

for the program to complete if time

delay is not set.

6. Check if the program follow-up

indicator on the screen lights up.

Canceling a program

1.Pressandholdthe`Start/Pause/

Cancel`buttonforabout3seconds;

the “Ready” light will start flashing.

2. The machine can drain all the water

or can take in water for 3 times at

most to cool down the clothes and

complete draining process.

Adding more laundry

• Thisisonlypossibleunderthe

following conditions:

1. during time delay,

You may add or remove laundry

during the time delay (until the

program starts).

2. At the beginning of a washing cycle,

Machine allows adding more laundry

during a future step only if the water

level is low enough to open the

loading door or if the temperature in

the machine is low

In order to add laundry after the start-up

of the program:

1.Press“Start/Pause/Cancel”

button. Wait for the safety lock to

open. “Ready” lamp will light up

continuously.

2. Open the loading door and put in

more laundry.

3. Close the loading door.

4.Press“Start/Pause/Cancel”button.

Re-spinning the laundry

The control system for an unbalanced

load can pause the spinning in cases

when the distribution of the laundry in

the drum is not balanced.

If you want to re-spin the clothes:

1. Rearrange the previously placed

clothes in the drum.

2. Select the spin program.

3. Adjust the spin speed.

After the program is finished

Programindicatorlightsonthescreen

remain lighted up after the program is

finished.

1. “End” will appear on the screen when

“ready” lamp lights up in the program

follow-up indicator. Open the loading

door and remove the laundry.

2.Pressthe“On/Off”button.

3. Turn off the faucets.

4. Check the rubber door seal for any

foreign objects.

5. Leave the door and dispenser drawer

open to dry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WM 67120 NBL00 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg WM 67120 NBL00 Manual

Product: