581565

Blomberg TKF 8431 G Manual

18
Zoom out
Zoom in
Previous page
1/44
Next page
18
EN
Sensor
There are humidity sensors in your dryer that detect
whether the laundry is dry or not.
To clean the sensor:
1. Open the loading door of the dryer.
2. Allow the machine to cool down if drying has been
carried out.
3. Wipe the metal sensors with a soft cloth, dampened
with vinegar and dry them.
C Clean metal sensors 4 times a year.
A Never use solvents, cleaning agents or similar
substances when cleaning since these materials can
cause fire and explosion!
Water tank;
The moisture in the damp laundry is taken from the
laundry and condens ed. Drain the water tank after each
drying cycle or during drying when “Water tank” warning
light turns on.
A Condensed water is not drinkable!
A Never take out the water tank when the programme
is running!
If you forget to drain the water tank, your dryer will stop
during the following drying cycles when the water tank
is full and the “Water tank” warning light will turn on. If
this is the case, press the “Start/Pause/Cancel” button to
resume the drying cycle after draining the water tank.
5 Maintenance and cleaning
Filter Cartridge / Door Inner Surface
Lint and fibres released from the laundry to the air during
the drying cycle are collected in the “Filter Cartridge”.
C Such fibre and lint are generally formed during
wearing and washing.
C Always clean the filter and the inner surfaces of the
cover after each drying process.
C You can clean the filter and filter area by vacuum
cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up and open the
filter.
3. Clean lint, fibre, and cotton raveling by hand or with a
soft piece of cloth.
4. Close the filter and place it back into its
seat.
C Clogging may arise on the filter surface after using
your machine for some time; if this occurs, wash the
filter with water and dry it before using again.
C Clean the entire inner surface of the cover and door
gasket.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8431 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8431 G in the language / languages: English, German as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info