581565

Blomberg TKF 8431 G Manual

16
Zoom out
Zoom in
Previous page
1/44
Next page
16
EN
Time delay
With the “Time delay” function you can delay the
programme start up to 24 hours.
1. Open the loading door and put the laundry in.
2. Set the drying programme and spin speed, and if
required, select the auxiliary functions.
3. Press “Time delaying” buttons “+” and “-” to set the
desired time delay. The time delay symbol will flash.
4. Press “Start/Pause/Cancel” button. Then the time delay
starts to count down. The Time delay symbol lights
up. Start symbol lights up.
The “:” in the middle of the displayed time delay will start
flashing.
More laundry may be loaded or taken out during the time
delay period. At the end of the time delay countdown
process, time delay symbol fades, drying process starts
and the programme duration is displayed. The time on the
display is the total of normal drying time and delay time.
Time delay is started by pressing the start/pause/cancel
button in the exemplary figure.
Changing the delay time
If you want to change the time during the countdown:
1. Press “Start/Pause/Cancel” button for 3 seconds to
cancel the programme. Time delay function must be
set again for the required time.
2. Press Time delay buttons “+” or “-” to set the desired
time delay.
3. Press “Start/Pause/Cancel” button. The Time delay
symbol lights up. Pause symbol fades. Start symbol
lights up.
4. The “:” in the middle of the displayed time delay will
start flashing.
Canceling the time delay
If you want to cancel the time delay countdown and start
the programme immediately:
1. Press “Start/Pause/Cancel” button for 3 seconds to
cancel the programme.
2. Then, press “Start/Pause/Cancel” button to start the
desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to start the
programme.
2. “Start/Pause” symbol will light up to indicate that the
programme has started and “:” symbol between the
remaining time will continue flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Ventilation
Anti-
creasing
The progress of a running programme is shown through a
number of symbols on the screen.
At the beginning of each programme step, the relevant
symbol in the series of symbols will light up and thus, all
symbols will remain lit up at the end of the programme.
The symbol that is lit up at the far right of the series of
symbols indicates the step that is being carried out.
“Drying”:
- Lights up in all programmes apart from drying and
ventilation.
“Iron Dry”:
- Starts to illuminate when the drying degree reaches “iron
dry” step and remains illuminated until the next step.
“Cupboard Dry”:
-Starts to illuminate when the drying degree reaches
“wardrobe dry” step, and remains illuminated until the
next step.
“Cupboard Dry Extra”:
Starts to illuminate when the drying degree reach to
“wardrobe dry extra” step.
“Ventilation”:
- Illuminates when the programme ends.
C Anti-creasing icon will light up at the end of the
programme if anti-creasing function is active.
Changing the programme after the
programme has started
You can use this feature to dry your laundry in a different
program after your machine has started to run.
For example;
Press and hold the “Start/Pause/Cancel” button for about
3 seconds to “Cancel” the programme in order to select
“Extra Dry” programme instead of “Iron Dry” programme.
Select the “Extra Dry” program by rotating the program
knob. Press “Start/Pause/Cancel” button to start the
program.
CIf you select a new programme by turning the
programme selection knob while your machine is
running, then the current program is cancelled and
new programme information is displayed.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8431 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8431 G in the language / languages: English, German as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info