581565

Blomberg TKF 8431 G Manual

17
Zoom out
Zoom in
Previous page
1/44
Next page
17
EN
Adding/removing laundry in standby
mode
In order to add or take out laundry after the start-up of
the programme;
1. Press the “Start/Pause/Cancel” button to switch the
machine to “Pause” mode. Drying process will stop.
2. Open the door at Pause position and close it again
after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start the
program.
C Any laundry added after the drying process was
started may cause the already dried clothes in the
machine intermingle with wet clothes and the result
will be wet laundry after the drying process is over.
CLaundry may be added or taken out as much as
desired during a drying process, but as this process
will interrupt drying continuously, it will extend the
program duration and increase energy consumption.
Therefore, it is recommended to add laundry before
the drying programme has started.
C If you select a new programme by turning the
programme selection knob while your machine is in
standby, then the current program is cancelled and
new programme information is displayed.
Child-proof lock
There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all button
except the “On/Off” button on the panel are deactivated
when the child-proof lock is active.
In order to activate the child-proof lock, press on
the “audio warning” and “anti-creasing” buttons
simultaneously for 3 seconds.
To start a new programme after the programme is over or
to interrupt the programme, the child-proof lock should
be deactivated. Press the same buttons for 3 sec. again
to deactivate the child-proof lock.
Lock symbol will appear on the screen when the child-
proof lock is activated.
C Child-proof lock will also be deactivated when the
machine is restarted by pressing the on/off button.
When the child-proof lock is activated:
• Display icons will not change even if the position
of programme selection knob is changed while the
machine is running or in halt.
• If the child-proof lock is deactivated after changing
the position of the programme selection knob while
your machine is running, your machine stops and
new programme information is displayed
Ending the programme through canceling
A new program can be selected and started after
“Program cancel” is activated in order to change the
drying program.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for about 3 seconds.
“Lint filter cleaning” and “Water tank” warning symbols
light up and “End” label appears on the screen as a
reminder at the end of this period.
A As the inside of the machine will be excessively hot
when you cancel the program while the machine is
running, activate the ventilation program to cool it
down.
C If you change the position of programme selection
knob while your machine is running, then the
machine stops, current programme is cancelled and
new programme information is displayed.
End of programme
“Filter cleaning” and “Water tank” warning symbols
light up and “End” label appears on the screen in the
programme follow-up indicator when the programme
ends. The door can be opened and the machine becomes
ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C When selected, the 2-hour anti creasing programme
will be activated to prevent laundry from creasing if
you do not take the laundry out after the programme
has come to an end.
C Clean the filter after each drying (please see, Filter
cleaning).
C Drain the water tank after each drying (please see,
Water tank)
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8431 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8431 G in the language / languages: English, German as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info