621998
9
Zoom out
Zoom in
Previous page
1/12
Next page
www.BISSELL.com
9
PORTABLE SPOT CLEANING
MODE
C-6 Preparing the machine
1. Step on portable spot cleaning pedal to
release portable spot cleaner.
2. Release flex hose by twisting hose
secure latch clockwise. Unwrap flex hose
completely.
3. Attach desired cleaning tool to hose grip
until it snaps together. Make certain tool is
securely attached.
4. Twist Quick Release cable wrap clockwise
to unwrap power cable completely and plug
into grounded outlet.
C-7 Filling tank
Cleaning with Tools
Important! If using to clean upholstery,
check upholstery tags. Check manufac-
turer’s tag before cleaning. “W” or “WS” on
tag means you can use your deep cleaner.
If tag is coded with an “X” or an “S” (with
a diagonal stripe through it), or says “Dry
Clean Only”, do not proceed with any deep
cleaning machine. Do not use on velvet or
silk. If manufacturer’s tag is missing or not
coded, check with your furniture dealer.”)
1. Follow instructions for filling tank in
upright cleaning mode section in section
C-2.
2. Attach cleaning tool of choice to end of
hose.
3. Hold tool approximately 2.5 cm above
soiled surface. Press spray trigger to apply
cleaning solution to soiled area.
Caution: Do Not Overwet.
NOTE: Hold end of hose below tank
water level to help prime the portable
spot cleaner.
4. Using brush on tool, gently scrub the
area to be cleaned.
5. Apply downward pressure on tool and
pull it toward you. The suction will remove
dirt and cleaning solution. Continue until no
more dirt can be removed.
Empty dirty tank
Follow instructions under Empty dirty tank
in section C-4.
C-8 Cleaning portable machine
1. Before turning off machine, suction up
clean water from a bowl or from tap to
rinse out interior of the hose. Then, lift the
cleaning tool and point it upwards to drain
any remaining water into tank.
2. Remove and rinse tools in clean, running
water. Dry and replace in tool storage
provided.
3. Coil flex hose around hose wrap and
secure with latch.
4. Check suction gate and if it appears dirty,
follow steps 1-4 under Cleaning Suction Gate
in section D-1.
C-9 Replacing portable machine
on base
1. Align machine as graphic shows, with
cable side on left and hose side on right.
2. Push down portable spot cleaner until it
can be heard clicking securely into place.
Test fit by pulling up on carry handle to
make sure it is secure.
IMPORTANT
Check for colourfastness in an inconspicuous place. If possible,
check upholstery stuffing. Coloured stuffing may bleed through
fabric when it becomes wet.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Powerwash Lift-Off 1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Powerwash Lift-Off 1190 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell Powerwash Lift-Off 1190

Bissell Powerwash Lift-Off 1190 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info