Manual Bissell Powerwash Lift-Off 1190 (page 7 of 12) (English)

621998

Zoom out

Zoom in

1/12

C-1 Before you clean

1. Plan activities to give carpet time to dry.

2. Move furniture to another area if cleaning

entire room (optional).

3. Vacuum area with a dry vacuum cleaner

thoroughly before deep cleaning.

4. Plan your cleaning route to leave an

exit path. It is best to begin cleaning in

the corner farthest from your exit.

5. Pretreating (optional):

Pretreating is recommended to improve

cleaning effectiveness for heavily soiled

carpet in high traffic areas such as entryway

and hallways.

To pretreat:

a. Using BISSELL Stain Pretreat,

generously spray evenly over soiled

area. Do not overwet.

b. Wait 3-5 minutes before deep

cleaning.

c. Clean as normal using machine,

following instructions in section C-2.

UPRIGHT CLEANING MODE

C-2 Filling formula & water tank

1. Remove tank from base of machine by

lifting up tank carry handle.

NOTE: This tank was designed with a flat

bottom so it can be easily filled.

2. Unscrew black cap and remove bottle insert.

3. Fill tank with hand hot (60°C/140°F MAX)

tap water to water fill line. Add 60 mL of

BISSELL 2X formula to tank. Do not boil or

microwave water as it can destroy the tank.

4. Replace bottle insert in tank and tighten

black cap. Replace tank on machine.

C-3 Carpet cleaning

1. Plug into a proper outlet and press power

button.

2. With foot, press gray recline pedal,

located on back of machine in between

wheels.

3. While pressing spray trigger, make one

slow forward wet pass and another one back.

Caution: Do not overwet.

4. Release spray trigger and make one slow

forward and backward pass over same area.

5. Repeat cleaning passes until solution

being suctioned up appears clean. Continue

passes without pressing spray trigger until

water is no longer being suctioned up.

Repeated passes will help aid in dry time.

NOTE: Machine may be equipped with a

circuit breaker that will automatically shut

off the brush if a large or loose object is

caught in the brush roll. If that happens,

be sure to unplug machine, remove foreign

object, and then plug machine back in to

reset circuit breaker.

www.BISSELL.com

Take care not to run over loose objects or edges

of area rugs. Stalling the brush may result in

premature belt failure.

Brush may unexpectedly restart. To reduce the

risk of injury from moving parts, unplug before

cleaning or servicing.

ATTENTION

Some Berber carpets have a tendency to fuzz with wear.

Repeated strokes in the same area with an ordinary vacuum

or deep cleaner may aggravate this condition.

To reduce the risk of fire, use only BISSELL deep

cleaning formula for full size machines in your

deep cleaner. Use of cleaning formulas that

contain lemon or pine oil may damage this appliance and

void the guarantee. Chemical spot cleaners or solvent-based

soil removers should not be used. These products may react

with the plastic materials used in your deep cleaner causing

cracking or pitting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Powerwash Lift-Off 1190 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell Powerwash Lift-Off 1190

Bissell Powerwash Lift-Off 1190 User Manual - German - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bissell Powerwash Lift-Off 1190 Manual

Product: