621998

Bissell Powerwash Lift-Off 1190 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
www.BISSELL.com
8
C-5 Cleaning your machine
1. Flush out machine of any remaining
residual solution.
a. Fill formula & water tank with hand
hot (60°C/140°F MAX) tap water and
turn on machine.
b. Recline handle and press spray
trigger for about 15 seconds while
making forward and backward
passes on carpet. Continue without
pressing spray trigger until there is
no more water being suctioned up.
c. Turn off machine and wrap power
cable. Make sure dirty tank and the
formula & water tank are emptied,
rinsed, and dried before next use.
d. Before you replace tank, clean all
debris from red filter screen.
2. Rinse nozzle assembly of any dirt
and debris.
a. Remove portable spot cleaner from
base of the machine.
b. Remove nozzle assembly from
machine by unscrewing 3 screws and
lifting away upper and lower nozzle.
c. Rinse upper and lower nozzles in
clean tap water.
d. Place lower nozzle back onto machine
by hooking tabs into holes on bottom
sides of front of machine.
e. Place upper nozzle onto lower nozzle
by hooking tabs into the holes on front
of lower nozzle. Secure with 3 screws.
3. Inside of end caps can be wiped out
with a clean paper towel, or for a more
thorough clean, end caps can be taken
off and rinsed clean.
4. Any loose hair or debris can be pulled
from brush rolls and thrown away. For a
more thorough clean, follow directions
in section D-4 for removal of brush rolls.
Machine is now ready to be stored.
NOTE: Store cleaner in a protected, dry
area. Since product uses water, it must
not be stored where there is a danger of
freezing. Freezing will damage internal
components and void the guarantee.
C-4 Empty dirty tank
1. When dirty tank reaches “FULL” line on
tank, it is time to empty.
2. Remove dirty tank and carry to a utility
sink, toilet or outside (where you will dispose
of the dirty water).
3. To unlock dirty tank lid, rotate handle
over back of tank. Remove lid and pour out
dirty water. Rinse out dirty tank to remove
any debris.
4. Replace top of tank, and rotate handle
forward to lock in place on front of tank.
5. Before replacing tank on machine, wipe
debris from red filter.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Powerwash Lift-Off 1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Powerwash Lift-Off 1190 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell Powerwash Lift-Off 1190

Bissell Powerwash Lift-Off 1190 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info