814571

Bianco di puro Tune Pro Manual

28
Zoom out
Zoom in
Previous page
1/38
Next page
EN EN
16 17
OPERATING IN MANUAL MODE
Manuel mode
When this mode is activated, all the program icons, the function buttons and the on-off switch will light up on the control
panel. In this mode, the 9 preset-programs, the manual mode with the speed steps 1 to 60 and the run time setting, as
well as the pulse mode in step 60 are available.
Set up run time
Using the left controlknob for setting your desired mixing time in 10-second intervals. The maximum running time is 10:00
minutes. It can be increased or decreased during mixing processes.
Set up speed level
Using the right controlknob for setting the speed level to your personal wishes. The speed level can be increased or decrea-
sed during mixing processes. Please note, that after choosing a speedlevel the blender starts immediately.
Start up manual mode (with selected runtime)
Choose your personal runtime for blending with the left controlknob. Now, you have to start the blender while selecting a
speedlevel. To end the mixing process prematurely in manual mode, tap the on-off switch. The mixing process is terminated
automatically after reaching the set runtime.
Start up manual mode (w/o selected runtime)
If the mixing process is to be used w/o selected runtime, the mixing process is started immediately by selecting a speed
level.
Pause during manual mode / pause button4;
If you want to pause in manual mode without stopping the mix, briefly tap this button once. During the pause mode the
symbol4; will flash up in white. Tap the pause button again to resume mixing.
Exit manual mode
To end the mixing process prematurely in manual mode, press once the on-off switch. This will work also with and w/o
selected runtime selection.
Pulse button
By press the pulse button shortly the pulse mode gets activated. The speedlevel display shows “60”. Press and hold the
button again to start the pulse mode. While the pulse mode is activated the on-off switch and the pulse button flash white
and the display shows the elapsed time. Release the button to end the pulse function.
OPERATING WITH THE TAMPER T42S
Using of the tamper you can remove any air bubbles, e.g. when preparing dough, in the jar, without touching the blades.
With the integrated temperature display you can make sure your foods are prepared gently.
Overview
Run the tamper only through the lid opening of the measuring cup. (see Fig. 2, page 1). Use only the provided tamper
and no other objects to press the mixing content towards the blades. The less liquid you use, the more you have to work
with the tamper. If you use other objects, the device can be damaged.
Vorsicht Caution
Benutzen Sie
den Stampfer
nicht ohne
aufgesetzten
Deckel.
Do not use the
tampfer without
the lid.
Benutzen Sie
den Stampfer
nur mit
aufgesetzten
Deckel.
Only use the
tamper when the
lid is attached.
T42S Verwendung nur mit / Use only with
Cube+ / Cube+ / Square+ / Canto
To measure the temperature in the jar, please proceed as follows:
• Switch on the tamper with the on-off switch
• Take the measuring cup off the lid, leave the lid on the jar.
• Now hold the tamper into the jar through the opening.
• The handle of the tamper displays the temperature in °C.
CHANGE THE TEMPERATURE DISPLAY
If the display shows the temperature in °F (Fahrenheit), you can change into °C (Celsius) by holding the
On-/Off-button of the tamper for 3 seconds.
Display
On-off switch
RollStop
NOTE WHEN USING THE TAMPER T42S
• When using the tamper, always hold the jar with one hand!
• If you use other objects, the blender jar as well as the motor may be irreparably damaged.
ATTENTION
• Make sure that the blender jar is properly closed before starting the blender!
• By selecting a speedlevel in manual mode the blender starts immediately!
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bianco di puro Tune Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bianco di puro Tune Pro in the language / languages: German as an attachment in your email.

The manual is 2.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info