528710

BH Fitness G690 Monitor LED Manual V7 Manual

12
Zoom out
Zoom in
Previous page
1/55
Next page
SK LINE
sportkoncept
12
5) STEADY PULSE RATE TIME.
With the word “SPR time" flashing, press the ENTER key and a figure between 20 and 60 seconds will start
flashing. Select the flashing value using the LEVEL ▲ and LEVEL ▼ keys and then press ENTER to confirm,
the word “SPR time” will start flashing again, using the LEVEL▲ key , press ENTER.
If you wish to exit the personalisation mode press the STOP key.
PERSONALISED SETTINGS PANEL
Setting Description
1) Language
Define the language in which messages are displayed on the monitor.
Options: Spanish, Portuguese, English, French, German, Dutch, Italian.
2) Sounds
Enables or disables sound messages emitted by the monitor.
Options: - ON (Enabled)
- OFF (Disabled)
3) Text
Options: - OFF (The welcome message is displayed by default)
- ON (Allows the welcome message to be edited)
For personalising the welcome message, including, for example, the name of the
gymnasium.
4) Manual T
Establishes a maximum time limit for the exercise.
Options: - 0 (No maximum time limit established)
- Exercise time limit values in minutes (maximum 60)
5) SPR time
Establishes the calculation rate for the steady pulse rate program.
Options: Value in seconds (minimum 20, maximum 60)
CHANGING FROM km to Miles
To change from km to miles press the ENTER key for 10 seconds, this will take you to the change option,
displaying “KM” on screen (B). Use the INCLINE▲ and INCLINE ▼ keys to select the speed measure scale
(METRIC / km. -- IMPERIAL / Miles) and press the ENTER key.
ELEMENTS OF THE ELECTRONIC MONITOR (Fig 1)
The electronic monitor is made up of two distinct areas:
The top area, Fig. 2 (A – B – C ) for the DISPLAY
The bottom area, Fig. 3 (E – F – G ) for the KEYPAD
DISPLAY
This area comprises of two screens.
(A) The top LED array, which displays real-time exertion levels being produced during the selected
program.
(B) Bottom alphanumeric screen, which guides the user selection options and exercise.
The top screen (A) displays the various pre-programmed exercise profiles (programs) that we can select
and, during exercise, current exertion levels.
The bottom alphanumeric screen (B) is used to guide the user when selecting the exercise to do, as well as
displaying information about the exercise both during and after the session. The LED indicators (C) located
below the alphanumeric screen give a simultaneous readout of SPEED; TIME / DISTANCE; CALORIES /
WATTS; PULSE RATE and indicate which information is being displayed throughout the exercise.
The data that are displayed on the LEDs (C) during exercise are as follows:
-SPEED: This displays the linear velocity at which the belt is travelling. The value is displayed in
kilometres per hour (km/h).
-TIME: This shows the time that has elapsed since you started the exercise or, if a time limit has been
established, the amount of time left before the exercise finishes. The time is displayed in minutes and
seconds (mm:ss).
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G690 Monitor LED Manual V7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G690 Monitor LED Manual V7 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info