528710

BH Fitness G690 Monitor LED Manual V7 Manual

11
Zoom out
Zoom in
Previous page
1/55
Next page
SK LINE
sportkoncept
11
English
GENERAL INSTRUCTIONS
The electronic monitor is designed to be easy and intuitive to use. The messages that appear on the bottom
screen (B) will guide the user throughout the whole exercise.
Nevertheless, we recommend that the gym instructor reads through this section carefully to become fully
familiar with the electronic monitor in order to show the user how to operate it correctly.
NOTE: The monitor will switch back to stand-by mode after 4 minutes if no keys are pressed. The monitor can
be switched back to READY by pressing the STOP key.
PERSONALISING THE ELECTRONIC MONITOR
Follow the procedure below to access the monitor’s personalisation mode:
With the machine and the monitor switched off, press and hold the RESET key and turn the main switch (b)
to position 1 Fig. (A), located at the bottom front of the machine.
Fig. A.
1) CHANGING LANGUAGE
With the monitor on, the word “LANGUAGE" will appear flashing on the alphanumeric screen (B), Figure 1.
Press the ENTER key and the current language will start flashing. Select your language using the LEVEL▲
and LEVEL▼ keys and then press ENTER, the word “LANGUAGE” will start flashing again, using the
LEVEL▲ key , pass on to the ( 2 Sounds) setting on the adjoining bottom screen.
2) CHANGING THE SOUND.-
With the word “SOUNDS" flashing, press the ENTER key and the word ON or OFF will start flashing. Select
the flashing value using the LEVEL▲ and LEVEL▼ keys and then press ENTER to confirm, the word
“SOUNDS” will start flashing again, using the LEVEL▲ key to pass to the (3 Text) setting on the adjoining
bottom screen
3) CHANGING THE WELCOME MESSAGE.-
With the word “TEXT” flashing, press the ENTER key and the word ON or OFF will start flashing. Select the
option that is flashing by using the LEVEL ▲ and LEVEL▼ keys Choosing the ON option allows you to
change the monitor’s welcome message.
Once the ON option has been selected, press the ENTER key and a flashing cursor will appear on the
alphanumeric screen (B). Use the LEVEL ▲ and LEVEL ▼ keys to enter a welcome message letter by letter.
Once you have finished entering the message, press the ENTER key for a few seconds and the word “TEXT”
will start flashing. Use the LEVEL ▲ key to pass on to the (4 Manual T) setting on the adjoining bottom
screen. If you wish to exit the personalisation mode press the STOP key.
4) MAX. EXERCISE TIME
With the word “MANUAL T" flashing, press the ENTER key and a figure between 0 and 60 minutes will
start flashing. Select the flashing value using the LEVEL
▲ and LEVEL
▼
keys and then press ENTER to
confirm, the word “MANUAL T” will start flashing again, using the LEVEL▲
key
,
pass on to the ( 5 SPR
time ) setting on the adjoining bottom screen. If you wish to exit the personalisation mode press the STOP
key.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G690 Monitor LED Manual V7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G690 Monitor LED Manual V7 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info