542135
7
Zoom out
Zoom in
Previous page
1/34
Next page
7
English
ELECTRONIC MONITOR
MAINS CONNECTION
Insert the jack (Z) for the transformer
into the connection hole (R) on the
main body (bottom, rear of the
machine) and then plug the
transformer (77) into a 220 V mains
supply, Fig 1.
Important: Deposit electronic
components in special containers, Fig. 2.
ELECTRONIC MONITOR
To give you greater control over the
exercise, this electronic unit gives
simultaneous read-outs of speed and
rpm alternating with distance, exercise
time, calories burnt and pulse rate.
The screen will switch itself on
automatically as soon as you start
exercising or by pressing any key on
the monitor. The monitor switches on
as soon as you start to exercise on the
machine.
The monitor will switch itself off
automatically if the unit stands idle for
more than 4 minutes, with the screen
displaying the temperature.
A. SCAN FUNCTION
This function uses the large screen to
provide a sequential display of all the
values shown in the small windows, to
cancel this function press the MODE
key and the large screen will freeze
the value being displayed at the time
when the MODE key was pressed.
B. TIME FUNCTION
This function counts up or down in
steps of one second, up to a
maximum of 99:00 seconds.
1. Pressing the MODE key will select
the TIME window, the value to be
programmed will start flashing.
2. Pressing the SET key will display
the programmed exercise time.
3. Pressing the RESET key the
programmed exercise time will be
reset.
4. Begin the exercise and when the
time that you programmed has
elapsed the monitor will emit a beep
for 5 seconds, and the time will begin
to increase automatically.
C. DISTANCE FUNCTION
This function counts up or down in
steps of 0.5 km, up to a maximum of
99.5 km.
1. Pressing the MODE key will select
the DISTANCE window, the value to
be programmed will start flashing.
2. Pressing SET will display the
programmed exercise distance.
3. Pressing RESET the programmed
exercise distance will be reset.
4. Begin the exercise. When the
programmed distance has finished,
the monitor will beep for 5 seconds
and begin to increase the distance
automatically.
D. CALORIE FUNCTION
This function counts up or down in
steps of 10 calories, up to a maximum
of 999 kcal.
1. Pressing the MODE key will select
the CALORIES window, the value to
be programmed will start flashing.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G-238 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G-238 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info