534707
40
Zoom out
Zoom in
Previous page
1/73
Next page
BFB-3000 Set Up and Operations Manual
Document No: D100253 40
6.10 Start a print
Make sure all items below have been checked. This is essential to guarantee that the print
works.
Check the bed is clear of any build material (page 13)
Check the bed is fitted correctly (page 12)
Check the hot-end nozzles are clean from plastic debris (page 20)
Check the bed is level (page 21)
Check the bed is referenced to the extruder nozzles (page 28)
Load the extruders (page 31)
After the machine is setup correctly you will need to run two test files, documented in the
following sections. When asked to print a file you will need to follow the procedure below:
Insert the SD card into the BFB-3000 control box.
Turn the control box on.
Select “Run file”, and press Enter:
>
RUN FILE
EXTRUDER MAPPING
MANUAL MOVE
EXTRUDER CONTROL
HOME TOOL HEAD
SETTINGS
Current file:
FILENAME.BFB
File 3 of 3
Press Enter to confirm, and start the print.
The first 8
characters of
the filename
will be
displayed here.
If the filename
is longer than 8
characters only
the first 6
characters of
the filename
will be
displayed on
the control box.
The most
recently saved
file will appear
first. Use the Y
buttons to
scroll through
the BFB files
saved in the
root of the SD
card.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BFB 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BFB 3000 in the language / languages: English as an attachment in your email.

The manual is 8,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info