534707
39
Zoom out
Zoom in
Previous page
1/73
Next page
BFB-3000 Set Up and Operations Manual
Document No: D100253 39
Observe the end of the nozzle. A thin bead of molten plastic should come out of the
nozzle. Depending on how far the filament was loaded into the extruder, this could
take several minutes.
Allow material to purge for a few seconds before reducing the RPM to 0.
Repeat for each extruder.
Turn the machine off to allow the nozzles to cool.
As the extruders cool, clean the nozzles (see “Check the hot-end nozzles are clean”,
page 20).
Dispose of all waste filament from the nozzle.
Pressure bearing bolt
Thin filament
of plastic
4mm hex
driver from
toolkit
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BFB 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BFB 3000 in the language / languages: English as an attachment in your email.

The manual is 8,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info