568800

Beurer IPL 9000 plus Manual

37
Zoom out
Zoom in
Previous page
1/124
Next page
37
1. You must carry out a skin sensitivity test 48 hours before treatment (see Chapter 7, step 2). The skin
sensitivity test should be performed on an area without hair, such as below the ear or on the side of
the neck, to determine the suitable energy level.
WARNING
Do not treat the tested area until at least one week after performing the skin sensitivity test.
2. Mark the treated area with a white eyeliner pencil. Use the marking as an orientation line for issuing
the pulses. This way you can prevent overlapping the treatment areas or treating other areas of the
face by mistake.
3. Use a mirror to position the applicator correctly on the treatment area.
4. Follow the instructions for use (see previous chapter 8.1 “Starting treatment”) and observe the follow-
ing specific instructions, in particular.
Note
Facial hair can be a result of hormones, which means that several sessions may be required to achieve
permanent hair reduction
.
8.3 Treating the upper lip
Position the treatment window of the applicator as shown in the figure. Trigger a pulse in
every marked zone.
Avoid applying the treatment to the nostrils and lips, as these areas are more sensitive.
Note
You can "fold in" your lips or press them together to make the treatment area more taut, or apply a
thick layer of white eyeliner to the lips and around the edge of the lips. The white line ensures that the
energy of the flash is reflected and does not reach your lips, should you accidentally apply a pulse to
your lip.
8.4 Treating the cheeks and jaw
Position the treatment window of the applicator as shown in the figure. At each point, trig-
ger a pulse and move from one side of the check or jaw to the other.
8.5 Treating the neck and chin
Position the treatment window of the applicator as shown in the figure. At each point, trig-
ger a pulse and move from one side of the neck or chin to the other.
Note
Note: The skin on the lower third of the neck is more sensitive. For this reason, avoid overlapping
treatment areas.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer IPL 9000 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IPL 9000 plus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info