568802

Beurer IPL 10000 plus Manual

35
Zoom out
Zoom in
Previous page
1/128
Next page
35
Infection
An infection of the skin is extremely rare, yet still a possible risk after a burn or lesion to the skin caused
by the beurer SalonPro System.
Haematoma
In very rare cases, using the beurer SalonPro System can result in blue/purple haematoma that may last
five to ten days. Once the haematoma fades,
rusty brown discolouration of the skin (hyperpigmentation) can occur, which may be permanent.
STEP 7: What can be expected from treatment using the beurer SalonPro System?
For many users, the beurer SalonPro System may be the first experience they have with a light-based
device developed for use at home. The beurer SalonPro System is simple to use and hair removal ses-
sions do not take long. During a session with the beurer SalonPro System, it is normal to experience
and notice the following:
• Whirring of the fan – The cooling fan in the beurer SalonPro System makes a noise similar to a hair-
dryer. This is normal.
• Cracking noise with every pulse – When a pulse is triggered from the beurer SalonPro System, it is
normal to hear a kind of cracking noise at the same time as the flash of light.
• Slight impression of the applicator – This is necessary and helpful for the placement of adjacent
light pulses and is part of the beurer SalonPro System’s safety function.
• Feeling of warmth and prickling sensation – During each light pulse, it is normal to feel a slight
warmth and prickling sensation from the light energy. Remember that it is important to always use
the lowest energy level for the first hair removal sessions. You may feel a certain warmth up to an
hour after using the beurer SalonPro System.
• Slight reddening of the skin – During or directly after your session with the beurer SalonPro Sys-
tem, it is not unusual to experience a slight reddening of the skin. This is usually most visible around
the hairs themselves. However, if you notice complete reddening of the skin, blistering or burns, stop
using the beurer SalonPro System immediately.
8. Using the beurer SalonPro System
WARNING
If you would like to use the device on your facial area, first read the instructions in Chapter 8.2 to 8.6,
before looking at Chapter 8.1 “Starting treatment”.
8.1 Starting treatment
1. Remove the base unit, applicator and other components of the beurer SalonPro System from the
box.
2. Check that the cartridge is correctly plugged into the applicator.
3. Insert the mains cable into the socket of the beurer SalonPro System BASE UNIT.
4. Insert the other end of the mains cable into a plug socket. Your beurer SalonPro System is now ready
for use.
Note
Before the treatment, ensure that the skin is shaved, clean and dry (free from any residue such as
powder, cream, make-up, antiperspirant or deodorant).
WARNING
Do not clean the skin with flammable liquids such as alcohol or acetone shortly before using the
beurer SalonPro System.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer IPL 10000 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IPL 10000 plus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info