470360

Beurer BM 20 Manual

16
Zoom out
Zoom in
Previous page
1/76
Next page
16
•
When the measurement has been taken, the pressure dis-
sipates very quickly. The pulse, the systolic and diastolic
blood pressure are displayed.
•
Now press memory keys M1 or M2 to select the required
user memory. If you do not select any user memory, the
measurement result is assigned for storage in the user
memory which was last used. The symbol or
appears accord ingly in the display.
•
Using the on/off button, switch off the blood pressure moni-
tor. The measurement result is then saved to the selected
user memory. If you forget to switch off the device, it
switches off automatically after approx. 3 minutes. Even
then, the result is still saved to the selected user memory.
Note: Measuring can be cancelled at any time by pressing the
on/off button.
Wait at least 5 minutes before any new measurement!
6. Table for classification of blood pressure values (unit of measurement mmHg) for adults:
Range Systolic Diastolic Action
Hypotonia (degraded blood pressure) lower than 105 lower than 60 Check with doctor
Normal range between 105 and 120 between 60 and 80 Self check
Pre-hypertensive blood pressure range* between 120 and 140 between 80 and 90 Check with doctor
High blood pressure – degree I between 140 and 160 between 90 and 100 Consult your doctor
High blood pressure – degree II higher than 160 higher than 100 Consult your doctor
(*) Blood pressure range that might transfer to high blood pressure Adapted from JNC 2003
7. Displaying and deleting measurements
Memory recall
You can recall stored results from the two user memories and
display averages.
•
Press memory buttons M1 or M2. First the average is dis-
played of all the results held in this user memory. This is
indicated by reading .
•
Continue pressing the memory button to recall other individ-
ual measurement results – the first result to appear is that of
the most recent value measured. These individual values are
indicated by memory location numbers 1 to 30. After approx.
4 seconds, the date of the respective measurement result is
displayed and then the time after a further 4 seconds.
•
Once 30 individual values are in the memory, the oldest value
is deleted in order to make room for the new measured value.
•
Use the on/off button to turn off the device, or it will turn off
automatically after approx. 30 seconds.
Note: You can also use the two user memories to save meas-
urement results separately, e.g. in the morning and evening.
… 16 …


Need help? Post your question in this forum.

Forumrules
1

Forum

beurer-bm-20

Reset search

  • Sir switch not working only some number shows stop Submitted on 29-6-2022 at 15:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BM 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BM 20 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 7,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BM 20

Beurer BM 20 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info