Manual Beurer BM 20 (page 14 of 76) (English, German, French, Italian, Polish, Turkish, Spanish)

470360

Zoom out

Zoom in

1/76

•

Replace the battery cover carefully. Now you can set the

date and time.

Changing batteries

If the battery change

is blinking, the batteries are already

too low. Even though measurement is still possible, the

batteries should be replaced soon. If the battery change

is continuously illuminated, measurement is no longer

possible and you must replace all the batteries. Once batteries

have been removed from the device, the time must be reset.

Any measurement results that have been stored are however

retained.

Used batteries do not belong in the household waste. You are

legally obliged to dispose of the batteries. Dispose of them via

your specialist electrical supplier or local col-

lecting point for recyclable waste.

Note: Batteries containing pollutant sub-

stances are marked as follows: Pb = Battery

contains lead, Cd = Battery contains cadmium,

Hg = Battery contains mercury.

Setting the date and time

The date/time setting is necessary, so that you can save your

readings correctly with the date and time and call them up

again later.

To set the date and time, proceed as follows:

•

After inserting/replacing the batteries, press any button. The

year will then flash.

•

Using the M1 button, you can increase the basic values to

be set; using M2 you can decrease the values. Set the year

and confirm the entry using the on/off button.

•

Now set the month using the M1 and M2 buttons. Confirm

using the on/off button.

•

Now set the day using the M1 and M2 buttons. Confirm

using the on/off button.

•

Now you can set the time, which is displayed in 24-hour

mode: first the hours – confirm with on/off – and then the

minutes. After confirmation with the on/off button, the

device switches off automatically.

Mains operation

You can also operate this device with a mains part. When doing

so, there must not be any batteries in the battery compartment.

The mains part can be obtained from specialist retailers or from

the service address using order number 071.51.

•

To prevent possible damage to the device, the blood

pressure monitor must only be used with the mains part

described here.

•

Insert the mains part into the connection provided for this

purpose on the right-hand side of the blood pressure moni-

tor. The mains part must only be connected to the mains

voltage that is specified on the type plate.

•

Then insert the mains plug of the mains part into the mains

socket.

•

After using the blood pressure monitor, unplug the mains

part from the mains socket first and then disconnect it from

the blood pressure monitor. As soon as you unplug the

mains part, the blood pressure monitor loses the date and

time setting but the saved measured values are retained.

Sir switch not working only some number shows stop Submitted on 29-6-2022 at 15:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BM 20 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 7,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BM 20

Beurer BM 20 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer BM 20 Manual

Product: