546710
35
Zoom out
Zoom in
Previous page
1/48
Next page
Instruction manual
35
English
1. Take a medium-length M5 bolt and place a green
cardboard washer over the screw thread.
2. Repeat this for the other 11 bolts.
3. Decide which side of the fan blade is the side you want to
be visible.
4. Hold the fan blade with the side which must be seen from
below against the flat side of an assembly bracket. Make
sure the holes in the fan blade are aligned with the holes
in the assembly bracket.
5. Insert a bolt with a cardboard washer through all three
holes in the fan blade.
6. Tighten the three bolts.
7. Repeat this for the other three fan blades.
8. Take a long M5 bolt and place a spring washer over the
screw thread.
9. Place a paper gasket over the screw thread and screw
the bolt firmly onto the motor housing.
10. Repeat this for the other two bolts.
11. Screw the remaining three fan blades into place.
Figure 4 Fitting the fan blades
ASSEMBLY - Connecting the wires of the motor housing
1. Connect the wires in the motor housing to the connector in the
attachment plate.
Pay attention to the following coding:
Wire colour Connect to
Brown L
Blue N
Black L
2. Attach the eye of the green/yellow earth wire to the
attachment plate.
Figure 5 Wires in the motor housing
ASSEMBLY - Connecting the wires of the motor housing
Take the following parts from the packaging:
Two screws with washers
1. Unscrew two bolts on opposite sides of the
attachment plate.
If a distance sleeve is used, make sure the cam in
the protective cover falls into the groove at the top
of the distance sleeve.
2. Secure the attachment plate to the ceiling using two
attachment screws with washers.
3. Hang the fan from the hook of the attachment plate.
This will make it easier to connect the fan.
4. Connect the wires hanging down from the ceiling to
the connector in the attachment plate.
5. Attach the eye of the green/yellow earth wire in the
motor housing to the protective cover.
6. Attach the eye of the green/yellow earth wire of the
distance sleeve to the protective cover.
7. Attach the eye of the green/yellow earth wire of the
protective cover to the attachment plate.
Figure 6 Attaching the fan to the ceiling
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DNHD42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DNHD42 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info