546710
34
Zoom out
Zoom in
Previous page
1/48
Next page
Instruction manual
34
English
ASSEMBLY - Assembly with the distance sleeve
If you wish to use the ceiling fan with the distance sleeve, follow the instructions given below. Otherwise,
see “Assembly without the distance sleeve”.
Take the following parts from the packaging.
Protective cover with attachment plate
Distance sleeve
Motor housing
Locking pin with spring clip
1. Insert the metal end of the distance sleeve into the
protective cover.
2. Insert the four wires which come out of the motor
housing into the bottom of the distance sleeve.
3. Pull the wires out of the metal end of the distance
sleeve.
4. Insert the metal end of the distance sleeve into the
attachment of the motor housing. Make sure the
holes in the distance sleeve are aligned with the
holes in the attachment of the motor housing.
5. Attach the distance sleeve to the motor housing.
Insert the locking pin all the way through the
attachment of the motor housing.
Lock the locking pin by attaching the spring clip.
Figure 2 Fitting the distance sleeve
ASSEMBLY - Assembly without the distance sleeve
If you wish to use the ceiling fan without the distance
sleeve, follow the instructions given below.
Take the following parts from the packaging:
Protective cover with attachment plate
Motor housing
3 short M4 bolts and 3 spring washers
1. Take a short M4 bolt and place a spring washer
over the screw thread.
2. Repeat this for the other two bolts.
3. Insert the four wires which come out of the motor
housing through the top of the protective cover.
4. Rotate the protective cover so that the large holes
are aligned with the heads of the three bolts.
5. Attach the protective covering using the three bolts
and the spring washers. Tighten the bolts.
Figure 3 Attaching the protective cover to the motor housing.
ASSEMBLY - Fitting the fan blades
Take the following parts from the packaging:
Fan blades
Assembly brackets
12 medium-length M5 bolts and 12 cardboard washers
8 long M5 bolts and 8 washers
4 paper gaskets
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DNHD42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DNHD42 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info