546710

Bestron DNHD42 Manual

37
Zoom out
Zoom in
Previous page
1/48
Next page
Instruction manual
37
English
• The ends of the fan blades must all be the same distance from the ceiling. Measure this by placing
a ruler against the ceiling and measuring the distance from the ceiling to the end of a fan blade. Do
this for all four fan blades. If one of the fan blades is not the same distance from the ceiling as the
others, correct it by carefully bending the blade.
If the steps given above do not balance the ceiling fan, then carry out the procedure given below.
1. Set the fan to the speed which causes it to wobble the most.
2. Turn off the fan and place the balancing clip halfway along one of the blades.
3. Turn on the fan again and check whether the wobbling has increased or decreased.
4. Turn off the fan again and place the balancing clip halfway along another one of the blades.
5. Turn on the fan again and check whether the wobbling has increased or decreased.
6. Repeat this for the other fan blades and determine for which blade the wobbling decreases the most.
7. Place the balancing clip back on this fan blade, as close as possible to the assembly bracket.
8. Turn on the ceiling fan and check the wobbling.
9. Turn the ceiling fan off again and slide the balancing clip towards the end of the blade. Repeat this until
the fan wobbles the least.
10. Remove the balancing clip and stick the two balancing weights on either side of the blade at this
location.
OPERATION - Use
The fan blades must be completely still before changing the position of the summer/ winter switch.
1. Tilt the fan to the required angle. You can set the fan blades:
a. So that they rotate clockwise. Set the summer/winter switch to the top position (winter position).
b. So that they rotate anticlockwise. Set the summer/winter switch to the bottom position (summer
position).
2. Turn on the fan by pulling the speed control’s cord.
a. 1st positon: the fan operates at low speed.
b. 2nd position: the fan operates at normal speed.
c. 3rd position: the fan operates at high speed.
3. Turn off the fan by pulling the speed control’s cord again.
CLEANING AND MAINTENANCE
• Allow the halogen lights to cool down before cleaning or carrying out maintenance on the fan.
• Clean the exterior of the ceiling fan with a damp cloth.
• Dry the ceiling fan with a dry, soft cloth.
• Disconnect the fuse group concerned before cleaning the ceiling fan.
• Make sure that the electrical connections do not become damp.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
After a while, dust can accumulate on the fan blades. Remove the dust with a hand brush and/or a vacuum
cleaner.
GUARANTEE TERMS
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DNHD42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DNHD42 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info