612650

Bertazzoni Heritage H486GMFE MT Manual

21
Zoom out
Zoom in
Previous page
1/40
Next page
21
the two knobs, no effect will result on oven operation except only for lamp or fan
when switched on. Electric oven is heated by two resistances: one upper resistance
and one circular resistance; by turning the switch knob (Fig.26A-26B) the resistance
referred to the symbol printed on the knob ring will be switched on but in order to put
it in operation the thermostat knob has to be turned until the orange light on will
confirm that resistance is in operation. By turning the switch knob on one of the 5
operation mode the lamp will be switched on simultaneously with the related
resistance. Once the temperature and the type of resistance are selected, the
operation of the resistance will be controlled by the thermostat. It is therefore
accepted that during operation the orange light will switch on and off.
To turn off the electric oven set the switch knob to position 0 to prevent the
thermostat from controlling the elements. Setting the thermostat knob to position 0
turns off the elements but it is still possible, using the switch, to turn on the electric
fan and the oven light.
The switch has 5 different fixed positions corresponding to 5 different types of oven
operation:
- the symbol indicates that only the oven light is turned on;
- the symbol indicates that the circular element (3000W) and the electric
fan have been turned on;
- the symbol indicates that the grill element (2500W) and the electric fan
have been turned on;
- the symbol indicates that only the grill element (2500W) has been turned
on
- the symbol indicates that only the electric fan has been turned on.
When the knob is set to one of these five positions, the oven light is always on, thus
indicating that the oven is being energised.
When 5+0 switch is combined with gas thermostat, resistances are switched off;
only lamps and cooling fan operates. It is possible to use the oven convection fan by
selecting on switch knob one of the following modes:
For operating the oven on Dual Energy ranges, see paragraph for use of gas oven.
Once the gas oven use is finished, switch off all the oven functions by turning the
gas thermostat knob and 5+0 switch knob to position 0 (zero).
Fig 26A Fig 26B
Using the electric oven Before using the ovens for the first time:
- Remove all packaging and accessories from inside the ovens.
- Heat the ovens to 200°C for
½ hour to burn off
manufacturing residues.
- The automatic programmer must be set to Manual mode for ordinary cooking.
- The oven will not function when set in Automatic mode. See page 26.
To use the ovens:
1
Turn the function selector knob (Fig.27A-27B and Fig.28A-28B) clockwise to the
desired function.
The orange light will illuminate, indicating that the element is on.
2
Turn the temperature selector knob (Fig.29A-29B and Fig.30 for PRO T version
only)
clockwise to the desired temperature. The orange light will go out once the
oven has reached temperature and is ready for use. It is normal for this light to go
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni Heritage H486GMFE MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni Heritage H486GMFE MT in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bertazzoni Heritage H486GMFE MT

Bertazzoni Heritage H486GMFE MT User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info